Honeywell - Salisbury Electrical Safety Catalog

INSULATING PLASTIC GUARDS/ COVERS

LINE HOSES/ COVERS

ARC FLASH PPE

DIELECTRIC FOOTWEAR

INSULATED JUMPERS

VOLTAGE DETECTORS

INSULATED TOOLS

OUTAGE PROTECTION

SLEEVES

BLANKETS

HISTORY

CONTENT

GROUNDING

SAFETYLINE

HOT STICKS

INSULATORS

GLOVES

10-15 KV EPDM STINGER COVERS 10 KV-15 KV WILD LIFE OUTAGE PROTECTION CONDUCTOR COVER

INSTANT INSULATION

Instant Insulation may be installed as a permanent cover to protect against outages caused by weather, trees and animals. Instant Insulation resists ozone and ultraviolet deterioration while remaining flexible even at sub-zero conditions. Instant Insulation is made of orange or grey SALCOR® elastomer. Instant Insulation is sold in three diameters, each 12 feet in length. Each include six nylon UV resistant bar-lock cable ties to secure it to the conductor. Instant Insulation can be installed using the 2494 Applicator. To install, insert one end of the Instant Insulation into the applicator prongs, then roll and coil the insulation as shown. Secure the coil end with tape, cable ties, or rubber bands. To install, release the secured end and the Instant Insulation will unroll and enclose the conductor.

EPDM Silicone stinger covers are suitable for applications up to 15 kV phase to ground. The stinger covers are made with EPDM rubber, which is UV and ozone resistant and is applied over the conductor. They are designed to resist the test of time, sun and weather to keep the assets protected. The stinger cover can be installed without disconnecting the lead wire from the bushing. Stinger covers are available in three diameters and are easily cut down to the length needed in the field. Stinger covers are track resistant and made from ozone and UV resistant SALCOR® elastomer in a grey color. The covers are proven to provide years of reliable service either independently or when used with bushing covers. EPDM STINGER COVER FEATURES • Suitable for applications up to 15 kV phase to ground • Three sizes and multiple packaging options available & will fit conductors up to 0.75 in (19.05 mm) dia. • Flexibility of covers facilitate overhead installation on tight bends. Ideal for substation and distribution applications. • Excellent UV & Ozone resistance

Instant Insulation

PHYSICAL PROPERTIES Property

EPDM Stinger Cover

Specification

Standard

62

2494-ES

63

Material

EPDM

N/A

Color

Gray

N/A

Tensile Strength

600 PSI

ASTM D412 ASTM D412 ASTM D2240

Elongation Durometer

500%

78

ELECTRICAL PROPERTIES Property

Stinger Cover Cross-section

Specification

Standard

NOTE: Instant insulation is currently rated at 20 kV per ASTM D1050 18.2 Electrical flashover test. Material dielectric strength is of 486 V/mil. effective thickness is 0.15 in to 0.2 in (3.81 mm to 5.08 mm) when installed.

Dielectric Testing

486 V/mil (191.3 kV/cm)

ASTM D149

1127-ES

Flashover Rating

Refer to ordering information ASTM D1050

ORDERING INFORMATION

INSTANT INSULATION 12 FT ( 3.6 M) LONG

Flashover test

Flashover test

Item #

I.D. in (mm)

Dimensions ft (m)

Quantity Weight lb (kg)

Item # Dimensions in (mm)

Length ft (m)

Color

Weight lb (kg)

Phase to ground (kV) Phase to phase (kV)

Phase to ground (kV) Phase to phase (kV)

38-2SC-ES

0.375 in (9.5 mm)

2 ft (0.61 m)

10.5

18

25 pcs 9.5 lb (4.3 kg)

1127-ES

0.75 in I.D. (19 mm I.D.)

20

34.5

12 ft (3.6 m)

Grey

7 lb (3.2 kg)

38-50SC-ES

0.375 in (9.5 mm)

50 ft (15.3 m)

10.5 10.5 12.5 12.5 12.5 14.9 14.9

18 18 22 22 22 26 26

1 coil 1 coil 4 pcs

9.5 lb (4.3 kg)

1128-ES 1129-ES 1130-ES

0.75 in I.D. (19 mm I.D.) 1 in I.D. (25 mm I.D.) 1 in I.D. (25 mm I.D.)

20 20 20 20

34.5 34.5 34.5 34.5

12 ft (3.6 m) 12 ft (3.6 m) 12 ft (3.6 m)

Orange 7 lb (3.2 kg)

38-100SC-ES 0.375 in (9.5 mm)

100 ft (30.5 m)

16 lb (7.25 kg) 22 lb (10 kg) 21 lb (9.5 kg) 45 lb (20.5 kg) 22 lb (10 kg) 22 lb (10 kg)

Grey

8 lb (3.6 kg)

58-12SC-ES 58-50SC-ES

0.625 in (15.9 mm) 0.625 in (15.9 mm)

12 ft (3.7 m) coil

Orange 8 lb (3.6 kg)

50 ft (15.3 m) coil

1 pc 1 pc

—

1131-7-ES 1.25 in I.D. (32 mm I.D.)

7 ft (2.1 m)

Grey

58-100SC-ES 0.625 in (15.9 mm)

100 ft (30.5 m) coil 12 ft (3.7 m) coil 25 ft (7.6 m) coil

1131-ES 2494-ES

1.25 in I.D. (32 mm I.D.)

20

34.5

12 ft (3.6 m)

Orange 10 lb (4.5 kg)

34-12SC-ES 34-25SC-ES

0.75 in (25.4 mm) 0.75 in (25.4 mm)

4 pcs 2 pcs

— —

Universal Hotstick Applicator

1 ft (0.5 m)