Honeywell - Salisbury Electrical Safety Catalog

INSULATING PLASTIC GUARDS/ COVERS

LINE HOSES/ COVERS

ARC FLASH PPE

DIELECTRIC FOOTWEAR

INSULATED JUMPERS

VOLTAGE DETECTORS

INSULATED TOOLS

OUTAGE PROTECTION

SLEEVES

BLANKETS

HISTORY

CONTENT

GROUNDING

SAFETYLINE

HOT STICKS

INSULATORS

GLOVES

20 KV SILICONE STINGER COVERS SALISBURY ADVANTAGE

20 KV SILICONE STINGER COVERS SPECIFICATIONS PHYSICAL PROPERTIES Property

The Salisbury stinger covers SC and SCS series are extruded in EPDM or silicone rubber and designed for field installation over bare conductors. The covers provide electrical insulation and protection for phase to phase and phase to ground flashover that is caused by wildlife contact. Accepted by (RURAL Utility Services) RUS.

Specifications Silicone rubber

Test method

Material

N/A N/A

Color

Gray

Tensile Strength Elongation Durometer Temperature Tear resistant Ozone resistant

600 PSI min

ASTM D-638 ASTM D-412 ASTM D2240

≥200%

HIGH VOLTAGE WILD LIFE OUTAGE PROTECTION CONDUCTOR COVER

60 ±8

-40°C to 200°C

N/A N/A

New silicone stinger covers are suitable for applications up to 20 kV phase to ground. The new cover design offers improved electrical insulation for phase to phase and phase to ground protection. The covers are extruded with a tapered profile specifically designed to overlap onto itself and over the conductor further improving the dielectric properties and conductor protection. The new stinger covers are manufactured using silicone rubber which has excellent high and low temperature properties. They are designed to resist the test of time, sun and weather while keeping assets protected. The stinger cover can be installed without disconnecting the lead wire from the bushing. Stinger covers are available in six diameters and are easily cut down to the length needed in the field.

75 PPI min

No crack @ 40C°(107°F), 70 hrs N/A

UV resistant (ASTM G-26) Flammability rating (provided by material supplier) Comparative tracking Index

Yes

N/A N/A

UL 94 V-0

> 500 V

ASTM D-3638

Low temperature torsional stiffness

Pass

ASTM D 1053-92E

PHYSICAL PROPERTIES Property

Specifications

Test method ASTM D149

Dielectric strength Flashover rating

≥ 300 V/mil (118 kV/cm)

SILICONE STINGER COVER FEATURES • Suitable for applications up to 20 kV phase to ground • Six sizes available & will fit conductors up to 1.25 in dia. • Improved pliability at greater temperature ranges -40° C to 200° C • Excellent UV & Ozone resistance • Unique design profile • Excellent conductor protection and fit • Easy slip on installation, no tool required • Flexibility of covers facilitate overhead installation on tight bends Ideal for substation and distribution applications

Refer to ordering information ASTM D1050 18.2 electrical flashover test

60

61

Enhanced cover profile allows for easy “slip on” installation.

Volumetric resistivity

≥ 1 x 10 14 Ohm/cm

N/A

ORDERING INFORMATION

Flashover Test

I.D. in (mm)

Thickness in (mm)

Quantity ft (m)

Weight Ea. lb (kg)

Item #

Phase to Ground (kV)

Phase to Phase (kV)

34-25SCS-ES 34-50SCS-ES 38-25SCS-ES 38-50SCS-ES 50-50SCS-ES 58-25SCS-ES 58-50SCS-ES 100-25SCS-ES 125-25SCS-ES

0.75 in (19.1 mm) 0.75 in (19.1 mm) 0.375 in (9.5mm) 0.375 in (9.5 mm)

0.2 in (5.08 mm)

20

35

25 ft (7.62 mm) coil

16 lb (7 kg)

—

—

—

50 ft (15.24 mm) coil

—

0.2 in (5.08 mm) 0.2 in (5.08 mm) 0.2 in (5.08 mm)

20 20 20 20 20 20 20

35 35 35 35 35 35 35

25 ft (7.62 mm) coil

10 lb (4 kg) 20 lb (9 kg) 23 lb (10 kg) 26 lb (11 kg) 18 lb (8 kg) 18 lb (8 kg) 13 lb (5 kg)

50 ft (15.24 mm) coil 50 ft (15.24 mm) coil

0.5 in (12.7 mm)

NO AIR GAP OR CUTS ALONG THIS EDGE.

0.625 in (15.9 mm) 0.2 in (5.08 mm) 0.625 in (15.9 mm) 0.2 in (5.08 mm)

25 ft (7.62 mm) coil

50 ft (15.24 mm) coil 25 ft (7.62 mm) coil 25 ft (7.62 mm) coil

1 in (25.4 mm)

0.2 in (5.08 mm) 0.2 in (5.08 mm)

1.25 in (31.8 mm)