Honeywell - Salisbury Electrical Safety Catalog

INSULATING PLASTIC GUARDS/ COVERS

LINE HOSES/ COVERS

ARC FLASH PPE

DIELECTRIC FOOTWEAR

INSULATED JUMPERS

VOLTAGE DETECTORS

INSULATED TOOLS

OUTAGE PROTECTION

SLEEVES

BLANKETS

HISTORY

CONTENT

GROUNDING

SAFETYLINE

HOT STICKS

INSULATORS

GLOVES

TEMPORARY SIDE ARMS & TRANSFER ARMS

CONDUCTOR & CLEANING TOOLS

TEMPORARY TRANSFER ARM The Temporary Transfer Arm is used to change crossarms, insulators or poles on short spans up to and including 15 kV phase to phase. The mast (Cat. No. 1306M) is 2.5 in diameter by 6 ft (1.82 m) long. The horizontal arm (Cat. No. 1340WHF8) is 2.5 in diameter by 8 ft (2.44 m) long. The arm has a balanced load rating of 600 lb (272 kg); unbalanced at 150 lb (68 kg). TEMPORARY SIDE ARM - POLE MOUNTED The Temporary Side Arm - Pole Mounted holds energized conductors during replacement of poles and repair or replacement of insulators. It is made of 2.5 in (6.3 cm) diameter foam-filled fiberglass with removable and adjustable wire holders. Each arm has a strap hoist or chain binder. Specify length of arm and number of wire holders needed. Side arms without insulators are rated for 15 kV; with insulators, 35 kV. 8 ft side arm includes arm support. WLL: 4 ft (1.22 m) - 300 lb (136 kg) TEMPORARY SIDE ARM - CROSS ARM MOUNTED The 6 ft (1.83 m) side-mounted Temporary Side Arm - Cross Arm Mounted has 2 wire holders and is used as a temporary conductor holder while replacing or repairing existing conductors or insulators. Made from 2.5 in diameter foam-filled fiberglass. Both wire holders are adjustable and removable. Units without insulators are rated for 15 kV and 35 kV with insulators.

Tubular brush es are preferred when rubber gloving or when working on de-energized conductors. The steel bristles are internal to prevent damaging rubber gloves. The 2.5 in (63.5 mm) tubular brush is used in confined areas such as between two connectors or clamps. The “V” type wire brush es are available with epoxy-coated handle or universal attachment that can be used with hotsticks. Replacement brushes are available.

4110-ES

1300WH-ES

4112-ES

CONDUCTOR & CLEANING TOOLS Item # Description in. (mm)

13068I-ES Complete Unit

Weight Ea lb (kg)

4110-ES 4112-ES 4337-ES

5 in (127 mm) universal tubular “V” type handle with brushes 2.5 in (63.5 mm) tubular

1.3 lb (0.6 kg) 1.2 lb (0.6 kg) 0.2 lb (0.1 kg)

WLL: 300 lb (136 kg) OR 150 lb (68 kg) PER WIRE HOLDER.

186

187

TEMPORARY SIDE ARMS & TRANSFER ARMS

Weight lb (kg)

Item #

Description

13068I-ES 1300WH-ES

Temporary transfer arms w/insulators

65 lb (29.48 kg)

Wire hanger wo/insulators

3 lb (1.36 kg)