Honeywell - Salisbury Electrical Safety Catalog

INSULATING PLASTIC GUARDS/ COVERS

LINE HOSES/ COVERS

ARC FLASH PPE

DIELECTRIC FOOTWEAR

INSULATED JUMPERS

VOLTAGE DETECTORS

INSULATED TOOLS

OUTAGE PROTECTION

SLEEVES

BLANKETS

HISTORY

CONTENT

GROUNDING

SAFETYLINE

HOT STICKS

INSULATORS

GLOVES

SAFETYLINE UNDERGROUND TOOLS & GROUND ADAPTER DEVICE KIT

SAFETYLINE UNDERGROUND GROUNDING STUDS The 1712 and 1725 grounding stud series are used for grounding when the fault duty on the 600 amp deadbreak elbow/ “T” body exceeds the rating of a 200 amp grounding elbow, as rated by IEEE 386 at 10kA for 10 cycles. Grounding studs consist of a 10 ft conductor stud with male or female threads for replacing 200 amp bushing wells and/or insulating plugs and a ground clamp bar for use with regular grounding jumper assemblies. After the cable has been proven de-energized, the stud is installed and a ground is applied. The 1725001 grounding stud is made of 7/8 in diameter copper with a 5/8-11 female thread on one end and a 1in (2.5 cm) hex drive on the other end. This stud is fitted with a tapered guide and a 3/8 in diameter copper cross bar perch used for installing the ground. A socket drive is used for installation. For application, use catalog number 5900CS captured socket. The 17250003, 17250004 and 17250005 are steel grounding plugs and studs with one 5/8 in diameter perch. The perch has a sturdy lip to ensure clamp contact during faults. These models are supplied with grip-all attachments for application with insulated clampstick tools and connectors. These studs are used for grounding equipment such as non load-break connectors or power distribution connectors. The 1735 grounding stud is made of 7/8 in diameter copper with a 5/8-11 female thread on one end and a 1in (2.5 cm) hex drive on the other end for application with a socket drive. The cross bar perch is 3/4 in diameter copper, providing heavy duty service. This ground plug also comes equipped with a tapered guide and the yellow protective cap.

The underground spanner wrench is designed for installing and removing the connector bushing, and reducing bushing inserts. Can be used when the conductor is de-energized, but not grounded. The tool is used one way for installation, and turned over for removal. A universal toggle and spring is used with this tool and should be ordered separately (5900Q). Weight: 1 lb (0.45 kg). The plug installing tool is used to install or remove 600 amp reducing plugs. Weight: 2 lb (0.91 kg). The ground adapter device kit enables application of personal grounds up to a 600 amp separable pre-molded component system when used with a clampstick.

17250003-ES

1720-ES

TOOLS Item # 1720-ES

Description

Underground spanner wrench for 600 amp connector

172300-ES

Quick change plug installing tool

GROUND ADAPTER DEVICE KIT

172300-ES

17250004-ES

(1) 44C-ES Ratchet wrench (1) 5900Q-ES Universal toggle and spring

(1) 1 in (25.4 mm) 5900CS-ES Socket with Friction ball (1) 9206GAS-ES Elbow connector tool with inserts (3) 1725001-ES Underground ground stud (1) B1715-ES Bag

76174459-ES

158

159

UNDER GROUND GROUNDING STUDS

ASTM F855

SAFETYLINE HAND OPERATED GROUND SPIKE & HYDRAULIC CUTTER SPIKE

Material (Stud)

Weight Ea. lb (kg)

Grade

Fault Duty

Item #

Description

Threads

15 Cycles

1725001-ES

Copper electrode, female, hex drive, with guide 5/8-11 (F)

Cu

1 3 3 3 4

17 kA 27 kA 27 kA 27 kA 35 kA

2.2 lb (1 kg) 2 lb (0.9 kg) 2 lb (0.9 kg) 1.8 lb (0.8 kg) 3.5 lb (1.6 kg)

1712CS-ES

17250003-ES Steel electrode, male, grip-all, with guide 17250004-ES Steel electrode, female, grip-all, with guide

5/8-11 (M)

Steel Steel Steel

5/8-11 (F)

HAND OPERATED GROUND SPIKE: SPIKE DEPTH 1.75 IN (44,45 MM), CONDUCT OR MIN. 1 IN (25.4 MM)- MAX. 3.5 IN (88,9 MM)

17250005-ES Steel electrode, male, grip-all

3/4-10 (M)

Cable Assembly

ASTM F855

Weight lb (kg)

1735-ES

Copper electrode, female, hex drive, with guide 5/8-11 (F)

Cu

Item #

Description

Grade

Fault Duty

Clamp Item #

Cable

5900CS-ES

Captured socket for 1725001 and 1735

—

—

—

—

—

15 Cycles

1712CS-ES 1712U-ES 1712GA-ES

3 ft (0.91 m) FG Handle, Toggle /GA

1/0 Clear 760001E 1 1/0 Clear 760001E 1 1/0 Clear 760001E 1

14.5 kA 14.5 kA 14.5 kA

15 lb (6.8 kg) 10 lb (4.5 kg) 10 lb (4.5 kg)

Spike point with U

Spike point with eye with GA

HYDRAULIC CUTTER SPIKE: CLAMP CAT. NO. 760001E, CONDUCT OR MIN. 0 IN - MAX. 3.5 IN (88.9 MM)

Pump

ASTM F855

Cable Assembly Cable #2 Clear #2 Clear

Weight lb (kg)

Item #

Description

Grade

Fault Duty

MDL

P.S.I

15 Cycles

17150050-ES 17150060EPP

Huskie head

N/A

N/A

1 1

14.5 kA 14.5 kA

23 lb (10.5 kg) 52 lb (23.6 kg)

Spike point with eye - "T" screw 1715P392 10,000