Bullard Fire Helmet H3000

FIRE HELMET H3000

Cleaning Durability ABOVE AVERAGE

FIRE HELMET H3000

The universal half-shell helmet type A offers optimal protection with high functionality and unrivaled comfort.

Thanks to its design the helmet allows a great field of view as well as easy to use radio communication.

Inner shell extends to the edge of the outer shell and thus offers maximum protection EN443 certified One size fits all outer shell ADVANTAGES AT A GLANCE MAXIMUM PROTECTION THROUGH HIGH QUALITY

COMFORTABLE AND FUNCTIONAL

Angled head ring ensures maximum wearing comfort and a firm, secure fit Head ring is vertically and horizontally height-adjustable Headband with 6-fold straps Chin straps with and without cheek pads

FOCUS ON WASHABILITY AND HYGIENE

The cleaning durability was rated as above average in independent expert tests Can be completely dismantled in just a few simple steps Easy to clean inner shell due to special coating All individual parts are washable

EXCELLENT SERVICE

Short delivery times On-site demo through dense dealer network Maintenance Training

LONG SERVICE LIFE The Bullard H3000 is not subject to any binding segregation periods. In addition, all spare parts* are individual available and can be easily replaced.

* Excluding inner and outer shell

DETAILS ABOUT H3000

Type A, glass fiber composit Outer Shell Type A

Visor

Visor 14 cm

Reflective stripe

R316

Circular for best visibility

Adapter for Visor

Neck protector

Choose from three different options

Visor Adapter

R153

2-layer Aramid 4-layer Aramid leather

Chinstrap

Chinstrap with buckle. Available with or without chin pad

Aramid

Dutch style R728 R732 Leather R733

Adapter for torch and radio

Adapterkits for models MHL 10ex, UK4AAex, UK3AACOP

Suspension H3000

High-performance nylon, gradual adjustable in the front and back, about 45° angled in the back, easy to disassemble from inner shell with no tools

R1052

Universal adapter kit for torches

R1007

Adapter for modell Holmco

R1050

crown pad

R636

Adapter for modell Imtradex Firetalk

Brow pad

R1051

R635

Adapter for modell Ceotronics Flexcom

Ratchet cover

R1022

R1053

Chinstrap (incl. cheekpads) Chinstrap (excl. cheekpads) Suspension with ratchet and ratchet cover R164 R163

Full faced easy to clean coating, easy to disassemble from outer shell, adjustable chin straps Inner shell

Easy to adjust with one gloved hand Ratchet

R615

The helmet and its parts are washable.

ORDER INFORMATION

BASICS

Basic helmet (without visor and ear-neck protector), adjustable headband, ratchet, reflective stripes, chinstrap excluding cheekpads Basic helmet (without visor and ear-neck protector), adjustable headband, ratchet, reflective stripes, chinstrap including cheekpads

H3000 bundle I

H3000(colorcode)R163

H3000 bundle II

H3000(colorcode)

ACCESSOIRES

Visor 14 cm Visor adapter

R316 R153 R728 R732 R733 R989 R991

Visors

2-layer Aramid - washable

Neck protector

4-layer Aramid Dutch Style - washable

Leather

Torch plastics modell (ATEX zone 0)

Torch aluminium (no ATEX) Torch holder (individual)

R1034 R1052 R1007 R1050 R1051 R1053

Torches

Adapterkits for modells MHL 10ex, UK4AAex, UK3AACOP

Universal adapter kit

O-rings 33mm and 47mm

R1036 / R1037

Adapter for modell Holmco Scorpion Adapter for modell Imtradex Firetalk Adapter for modell Ceotronics Flexcom

Radio and Communication

COLORS

Colorcode

Luminesce

GLO

HIVIZ yellow luminesce

HVYLWGLO

HIVIZ yellow

HVYLW

SPARE PARTS

H3000

Headband including ratchet and cover - washable

R615 R164 R163 R636 R635

Chinstraps incl. cheekpads - washable Chinstraps excl. cheekpads - washable

crown pad - washable Brow pad - washable Ratchet cover - washable

Inner shell

R1022

Care Kit Aramid (brow pad, 2 ratchet cover, 2-layer ear-neck- protector) Care Kit Dutch Style (brow pad, 2 ratchet cover, 4-layer ear-neck- protector)

Care Kit 5-28

Care Kit 5-32

Reflective stripes set Aramid helmet cover Helmet mounting ring

STRH3 R1017

Outer Shell

Maintainance

R993

OPERATIONAL HYGIENE

2x ratchet cover R1022

Brow pad R635

ENP R728

Care Kit 5-28

Pad wash bag

2x ratchet cover R1022

ENP Dutch Style R732

Brow pad R635

Care Kit 5-32

Pad wash bag

OPERATIONAL HYGIENE MADE EASY Order the Bullard Care Kit and get ear-neck protector, brow pad as well as ratchet covers in a mesh wash bag

The Bullard team and their authorized dealers are at your service!

An overview of our range of other products

QXT Pro Thermal Imager

NXT Pro Thermal Imager

DXT Thermal Imager

TXS Thermal Imager

info@bullard.de

www.bullard.com

(+49) 2642 999980

Bullard Center 2421 Fortune Drive

Americas Operations 1898 Safety Way Cynthiana, KY 41031 • USA 877-BULLARD (285-5273) Tel: +1-859-234-6616 Fax: +1-859-234-8987

Bullard GmbH Dieselstraße 8a 53424 Remagen • Germany Tel: +49-2642 999980 Fax: +49-2642 9999829

Bullard Asia-Pacific Pte. Ltd. 51 Changi Business Park Central 2 #03-04 The Signature Singapore 486066

Lexington, KY 40509 • USA 877-BULLARD (285-5273) Tel: +1-859-234-6616 Fax: +1-859-246-0243

Tel: +65-6745-0556 Fax: +65-6745-5176

Status 08/24

User Instructions for H3000 Fire Helmets

USER INSTRUCTIONS Thank you for choosing a Bullard fire helmet. Fire helmets are a part of personal protective equipment and help to protect you from head injuries. Read all instructions and warnings before adjusting and using your helmet. WARNING FAILURE TO READ, UNDERSTAND AND FOLLOW ALL INSTRUCTIONS AND WARNINGS CAN CAUSE DEATH OR SERIOUS INJURY. HEAD SIZES AND WEIGHT The H3000 covers all head sizes from 52–62 cm. The total weight of the helmet without attachments is approximately 1,165 grams. ADJUSTING FOR HEAD SIZE WITH THE SURE-LOCK ® RATCHET. Turn the ratchet on the back of the headband fully counterclockwise (Fig. 1). Put the fire helmet on and turn the ratchet clockwise until the fire helmet fits comfortably but tightly. VERTICALLY ADJUSTING THE FIRE HELMET There are four catches on the headband adapters for connecting to four black fastening pins on the inner lining (Fig. 2). To adjust the headband higher or lower, simply press the catches firmly onto the black pins according to the desired setting. The fire helmet gives you even more vertical adjustment options by letting you change the position of the headband adapters. Vertical adjustment of the fire helmet (Fig.3). VISOR MOUNTING, PROTECTIVE PERFORMANCE, REPLACEMENT The visor has an adjusting screw on each of the right and left sides, which can be used to lock the visor in place. The visor assembly itself screws into the adapter and is released by pressing on the two locking tabs. The visor serves as face protection with limitations in the case of extreme temperatures and flying particles. It is recommended to remove the visor during an inside attack. The performance of the visor has been tested in the temperature range from -40° to +50°C. Components not marked “BT” should not be used under extreme temperatures. Visors with blistering, cracks, melting, severe scratches, or deformation must be

WARNING FAILURE TO READ, UNDERSTAND AND FOLLOW THIS INSTRUCTION AND WARNING CAN CAUSE DEATH OR SERIOUS INJURY. WARNING Make sure to use the correct type of visor, for EN443 certified structural fire helmets, visor should be marked with an “+”. Do not modify or alter this helmet in any manner. Use only parts and accessories approved by Bullard and listed in these User Instructions. FAILURE TO READ, UNDERSTAND AND FOLLOW THESE INSTRUCTIONS AND WARNINGS CAN CAUSE DEATH OR SERIOUS INJURY. WARNING Visors worn over non-designated corrective frames may transmit impacts which may damage the corrective eyewear thus creating a hazard to the wearer. FAILURE TO READ, UNDERSTAND AND FOLLOW THIS INSTRUCTION AND WARNING CAN CAUSE DEATH OR SERIOUS INJURY. WARNING Visors provide limited protection against brief accidental unintended contact with live low voltage conductors, as specified by the EN443. Protection offered is not comprehensive and should not be relied upon for extended contact or high-voltage situations. Regularly check all components for any damage or wear, replace immediatly if any wear or damage is found. FAILURE TO READ, UNDERSTAND AND FOLLOW THESE INSTRUCTIONS AND WARNINGS CAN CAUSE DEATH OR SERIOUS INJURY.

replaced immediately. VISOR MARKINGS

Markings EN14458:2018

Explanation of markings

European standard followed for the markings

Bullard

Manufacturer

14cm R316

Visor size

Example item No.

+

Increased thermal performance Face protector Example year of manufacture “See Instructions for use” Optional features and labeling

10

-40°C

Suitable down to -40°C

R1

Radiant heat protection level for visors with increased thermal performance Resitance to high speed particles (medium energy impact) at extremes of temperature

BT

E3 Electrical Properties Contact with liquid chemicals The visor and associated adapters have been tested for resistance to the following chemicals Chemical Concentration Sulfuric acid 30% Sodium hydroxide 10% p-xylen Undiluted Butan-1-oL Undiluted n-Heptan Undiluted

www.bullard.com

CHIN STRAP First, adjust the neck strap by the buckle so that the chin strap comes to rest as far forward as possible under the chin. You adjust the length of the chin strap using the two buckles on the right and left of the chin strap. The chin strap opens and closes by the buckle. The chin strap meets the requirements of the standard for the restraint system if the chin strap supplied by the manufacturer is worn and adjusted in accordance with these regulations. REPLACING PARTS For replacing parts or cleaning, the helmet can be disassembled quickly and easily. To do so, unscrew the four Allen screws on the chin strap mount. A matching Allen key is included with each helmet. CLEANING AND STORAGE OF FIRE HELMETS Always keep your fire helmet clean. If necessary, clean it before you examine it. Do not use the helmet if it is still wet after use or cleaning. WARNING ONLY COMPLETELY CLEAN AND DRY FIRE HELMETS MAY BE WORN. FAILURE TO READ, UNDERSTAND AND FOLLOW THIS INSTRUCTION AND WARNING CAN CAUSE DEATH OR SERIOUS INJURY. Manual Cleaning Do not use abrasive cleaners, benzine or solvents such as acetone, alcohol or similar to clean fire helmets. The universal cleaning agents Secusept™ Cleaner (0.5–1.0% solution) and the disinfectant Incidur are approved, as well as mild soapy water or an alternative detergent that does not damage the helmet. • Wipe helmet shell and all plastic parts of the interior lining with a damp cloth, then rub dry. • Clean the visor with lukewarm soapy water or alcohol-free glass cleaner, then rinse and wipe dry. • Remove straps and fabric of the interior lining then wash and disinfect them in a wash bag together with the duty clothing. Machine Cleaning WARNING! The fire service helmet is subject to very strong mechanical loads during machine cleaning. The helmet can be damaged and rendered unsafe for use if the Machine Cleaning instructions are not followed. The fire helmet can be washed in the washing machine when following these instructions: • Pack helmet in a padded wash bag • Load washing machine so that only one additional helmet would fit into the drum • Preselect “swivel program” for respirators • Start wash • Rinse four times Approved cleaning agents are: Eltra disinfecting detergent, manufacturer: Ecolab Dosage: 5g Eltra per 1 L fresh water Water temperature: 62°C ± 2°C Storage: Store and transport your fire helmet so that it is protected from moisture, preferably in the original packaging • Dry helmet thoroughly Cleaning Agents:

SNAP FITTINGS FOR VERTICAL ADJUSTMENT

RATCHET

HEADBAND ADAPTOR

Fig. 2

Fig. 1

Fig 3

FASTENING PINS

NECK STRAP ADJUSTMENT

CHIN STRAP ADJUSTMENT Fig. 5

Fig. 6

Fig. 4

BUCKLE

MODIFICATIONS TO THE HELMET WARNING!

Do not modify this helmet or use parts or accessories not approved by Bullard and listed in these user Instructions. Using non-approved parts or accessories will void the fire helmet’s certification and can impact the performance of the helmet. FAILURE TO READ, UNDERSTAND AND FOLLOW THIS INSTRUCTION AND WARNING CAN CAUSE DEATH OR SERIOUS INJURY. The standard version of your helmet complies with the applicable standards and therefore must not be modified or fitted with third-party components. Only use the spare parts and accessories approved by Bullard. The addition of non approved accessories can invalidate the type examination certificate of your helmet and can affect the insurance coverage. Only wear the helmet when it is fully assembled. LIFE AND MAINTENANCE OF YOUR BULLARD FIRE HELMET Your fire helmet is designed to absorb some of the energy of an impact. In addition, the fire helmet protects against flames, sparks, high temperatures and liquid chemicals. The fire helmet can be damaged or even destroyed while protecting against these hazards. Replace your helmet IMMEDIATELY after a hard impact, even if there is no apparent damage on the outside. The same applies if the fire helmet has been exposed to extreme heat such as a flashover. NEVER use a damaged helmet. It must be repaired – if possible – or rendered unusable. The length of your fire helmet’s service life is affected by the materials used in its construction, as well as the environment in which the helmet is used and stored. Recommendations on this topic should be sought from the manufacturer. This fire helmet with its painted shell made of high-strength and temperature resistant composite has excellent aging resistance and if undamaged does not undergo any changes due to sunlight (UV radiation). The service life of the fire helmet is mainly limited by mechanical, thermal and chemical stresses. The composite used in your helmet is considered very resistant to these stresses. The service life is further impacted by the extent and diligence of care and maintenance. It is the responsibility of your fire department’s management to decide when the helmet is to be removed from service. In case of doubt and for checking your fire helmet, contact your local distributor or Bullard Europe directly. Conduct a check of the helmet shell, interior, strapping and accessories at regular intervals and after each use.

www.bullard.com

User Instructions for H3000 Fire Helmets

WARRANTY Bullard provides a warranty for your fire helmet against defects in materials or workmanship for 24 months under normal use. Bullard will repair, replace or refund at its sole discretion. To claim warranty services, the helmet must be sent to Bullard carriage free. The fire helmet must not have been modified and the damage must not have resulted from improper use. CERTIFICATION Your fire helmet is approved according to the European standard for firefighter helmets EN 443:2008. The helmet is approved for inside attack and fire fighting training in buildings and other structures. Thermal conditions during fire fighting training, however, can sometimes be hard to control. Damage cannot be ruled out during use in fire fighting training and does not fall under the regular warranty. It is recommended to keep separate helmets on hand for this purpose. EU Declaration of Conformity The above product complies with the current European Directives for Personal Protective Equipment (EU2016/425) to be found at http://eur-lex. europa.eu as well as the standards EN443:2008 and EN14458:2018, available from www.beuth.de The complete Declaration of Conformity can be found at www.bullard.com ACCESSORIES AND SPARE PARTS When wearing additional pieces of personal protective equipment or accessories, (except for parts mentioned below) a helmet marked as complying with EN443:2008 may no longer comply with all sections of this standard. All accessories and spare parts are designed exclusively for use with the helmet Bullard H3000. They must not be used with other helmets or as stand-alone parts. Accessories and spare parts other than those listed here must not be fitted to the helmet.

Available colors Luminescent, Luminescent Hi-Vis Yellow, Hi-Vis Yellow, and unpainted.

Outer shell

Reflective stripes

Inner shell

Straps

Headband mount

Leather pad

Headband

Sweat pad

6-point suspension

CAUTION The protection a helmet gives depends on the circumstances of an accident, and wearing a helmet may not always prevent a fatal accident or prolonged disability. Always wear the helmet in the correct position and realize that no helmet can protect the neck area or unprotected parts of the head. This helmet is approved exclusively for use in firefighting, rescue, and civil protection. It is not suitable for sports or motorcycling.

R615 R164 R163

Headband with ratchet

Forked chin strap with buckle and cheekpads

Forked chin strap with buckle without cheekpads (Alternative to R164)

R1022 Cover for ratchet dial R635 Standard Browpad R632 H Series Browpad R316

Visor 14 cm long Anti-Fog coating*

R153 R732 R733 R728

Visor adapter

ENP - dutch style aramid

ENP - leather (Alternative to R732) ENP – aramid (Alternative to R732)

STRH3 Reflective stripes R121

Replacement suspension R1050 Adapter for model Holmco R1051 Adapter for model Imtradex Firetalk R1052 Adapter kits for models MHL 10ex, UK4AAex, UK3AACOP R1053 Adapter for model Ceotronics Flexcom R1007 Universal adapter kit for torches * IMPORTANT : The visor is equipped with anti-fog properties. Resistance to fogging, according to EN14458:2018, has not been certified.

www.bullard.com

User Instructions for H3000 Fire Helmets

0299 CE Notified Body

DGUV Test, FA PSA Prüf- und Zertifizierungsstelle, Zwengen- bergerstr. 68, 42781 Haan, ID. No.0299

Bullard Center 2421 Fortune Drive

Americas Operations 1898 Safety Way Cynthiana, KY 41031 • USA 877-BULLARD (285-5273)

Bullard GmbH Dieselstrasse 8a 53424 Remagen • Germany Tel: +49-2642 999980 Authorized representation and distribution

Bullard Asia Pacific Pte. Ltd. 51 Changi Business Park Central 2 #03-04 The Signature

Lexington, KY 40509 • USA 877-BULLARD (285-5273) Tel: +1-859-234-6616

©2024 this documentation provides information on the state of the art at the time of printing. Technical developments, deviations due to changed standards, and errors reserved.6029005728L EN (0824)

Tel: +1-859-234-6616 Certificate holder and distribution

Singapore 486066 Tel: +65 6745 0556

www.bullard.com

Bullard H3000 Firefighting Helmet Technical Specifications

Outer shell • Protection from heat, impact and penetration. • Helmet Type A, half-size shell according EN443:2008, Glassfiber-Composite, lightweight and resistant to chemicals, heat flames, impact, penetration and aging. • 3-layer paint system, luminescent yellow, stabilized against UV waves with reflective stripe as a standard. • One helmet size fits head sizes 52-64cm Inner shell • Made from HD-PUR, reinforced and covered by an inner plastic shell for easy cleaning. • Full-surface impact protection and insulation against heat all over the entire helmet inside. • Inner and outer shell detachable for inspection, cleaning and maintenance. • Adjustable 6-point crown straps. Headring and adjustments • Headring made from HD-Nylon, rear side offset by 45° for perfect and safe fit. • Ratchet system with a big and low positioned knob, easily accessible for quick and easy adjustment to all head sizes 52-64 cm. • Large adjustment ratchet, easily adjustable with one hand, with the helmet on and even when wearing gloves. • Sophisticated system for adjusting height and inclination. • Fabrics made of soft, flame-resistant Nomex. • Removable with no tools and easy to clean. Separately available as spare part. Chin strap • Chin strap with 3-point attachment made from Nomex with quick release buckle. • Widely adjustable for all kind of head sizes. • Adjustable on both sides, neck strap adjustable by “fireman buckle”. • Option: chin cup strap Visor • Strong, solid and optically correct injection molded • „Plug and play“ system for quick and easy assembly and removal. • Clear visor for the use by fire fighters and rescue teams. • 14 cm length. • Antifog and antiscratch coating as a standard. • All components separately available as spare parts

____________________________________________________________________________________________________________________________________________________ Bullard Center 2421 Fortune Drive Americas Operations 1898 Safety Way

Bullard GmbH Dieselstrasse 8a 53424 Remagen • Germany Tel: +49-2642 999980 Fax: +49-2642 9999829

Bullard Asia Pacific Pte. Ltd. 51 Changi Business Park Central 2 #03-04 The Signature Singapore 486066 Tel: +65 6745 0556

Lexington, KY 40509 • USA 877-BULLARD (285-5273) Tel: +1-859-234-6616 Fax: +1-859-246-0243

Cynthiana, KY 41031 • USA 877-BULLARD (285-5273) Tel: +1-859-234-6616 Fax: +1-859-234-8987

Bullard H3000 Firefighting Helmet Technical Specifications

Neck Protector • Made of Nomex with inner lining to protect the neck, ears and parts of the cheeks against flames, sparks, steam and liquids. • Tight, flush insertion with Velcro. • Alternatively “Dutch Era Neck Protector” according HuPF Light and Radio • Universal adaption system to take all common types and models of torches and radio systems. • Torch attachment via a torch fastener and elastic straps in different sizes takes any torches’ shape and diameter. • Torch fastener pivotal and detachable, positioned below the eye line. • Universal radio adaption made from an adapter and a radio fastener. • Radio fastener can be adjusted horizontally and vertically. • Both adaption systems fit left and right. • Helmet mounted torches with and without Atex. Small, light weight, strong and long performance Lifetime Bullard helmets do NOT come with a mandatory date of expiry Weight: approx. 900g Certification EN443:2008 Helmet and Accessories EN14458:20 18 Visor EN469 Neck Protector and Dutch Ear Neck Protector Training the Helmet Expert

June 2024 (84 10 )

____________________________________________________________________________________________________________________________________________________ Bullard Center 2421 Fortune Drive Americas Operations 1898 Safety Way

Bullard GmbH Dieselstrasse 8a 53424 Remagen • Germany Tel: +49-2642 999980 Fax: +49-2642 9999829

Bullard Asia Pacific Pte. Ltd. 51 Changi Business Park Central 2 #03-04 The Signature Singapore 486066 Tel: +65 6745 0556

Lexington, KY 40509 • USA 877-BULLARD (285-5273) Tel: +1-859-234-6616 Fax: +1-859-246-0243

Cynthiana, KY 41031 • USA 877-BULLARD (285-5273) Tel: +1-859-234-6616 Fax: +1-859-234-8987

JiziBullard� H3000 Basic Helmet

ITEM# PART# 1. N/A

DESCRIPTION Aul3enschale* Outer Shell* Reflexstreifenset Set of Reflective Stripes Lampenadapterkits Torch Adapter Kit Sto13dampfungsschale* Inner Shock Liner* Adapter fUr Visiertrager Adapter for Visor Carrier Visier ohne Visiertrager Visor with No Mounting Kits

ITEM# PART# 7.

DESCRIPTION Nackenschutz Ear-Neck Protector Kopfbander mit Kopfpolster* Crown Straps with Pad* Polsterabdeckung Drehverschlul3 Ratchet Pad Cover Beriemung Standard mit W angenpolster Chin Strap Standard with Cheekpads Kopfring mit Drehverschluss und Polstern Head Bands with Ratchet and Pads

R728, R732, R733

N / A

2.

STRH3

8.

3.

R1007

R1022

9.

4.

10.

R 164

N/A

5.

R153

11.

R615

6.

R316

* nicht als Ersatzteil erhaltlich not available as spare part

CARE KIT

We support FeuerKrebs gUG

CLEANING MADE EASY – HYGIENE IN THE FIELD Bullard Care Kit

SHINING PERFORMANCE

You shine with selfless dedication to others and we shine with our well-engi neered solutions designed to enhance your hygiene in the field. A good example are helmets that are easy to disassemble and clean. And because washable textiles need to be regularly replaced to comply with hygiene demands, we offer you the Bullard Care Kit, which contains a brow

pad, an ear/neck protector and cotton ratchet covers. A practical washable mesh bag is included with every order at no extra cost. Our consistently-implemented hygiene concepts are our contribution, not only to health preservation in the face of everyday fire-fighting activities, but also to reducing the long term risks associated with chemical exposure.

WE HELP PROTECT HEROES

For every Bullard Care Kit sold* we will donate one euro to the non-profit organisation FeuerKrebs.

Two cotton ratchet covers

Ear/neck protector

Washable mesh bag

Brow pad

OVER 100 YEARS OF EXPERIENCE

Our vision is to advance human safety to en able long, healthy, productive lives through innovative solutions. This is why we have been developing innovative work protection solutions for more than 100 years. Founded in 1898 in San Francisco, Bullard is one of the world’s leading suppliers of personal

protection equipment. The “Hard Boiled ® ” hat developed by its founder, Edward Dickin son Bullard, in 1919 symbolises the success of the company. It is a classic design, imme diately recognisable, and a standard-issue component on building sites and other operational locations all over the world.

*Sales made throughout Germany for the period 1 April 2019 to 31 October 2019. The helmet is not included with the Bullard Care Kit.

THE KIT FOR ALL POSSIBILITIES

Ear/neck protector

Cotton ratchet covers

Helmet type

Brow pad

R960

R1026

R961

R728

R732

Care Kit 3-28

Care Kit 3-32

H1500

R1022

R1023

Care Kit 5-28

Care Kit 5-32

H3000

R1022

R635

Care Kit 9C-60

Care Kit 9C-1026

Care Kit 9C-61

Magma

R1022

R959C

OVERVIEW OF KIT CONFIGURATIONS

H1500

Washable mesh bag

2x Cotton ratchet covers

Nomex Ear/ neck protector

Care Kit 3-28

Brow pad

Nomex Dutch Ear/neck protector

Washable mesh bag

2x Cotton ratchet covers

Care Kit 3-32

Brow pad

H3000

Washable mesh bag

2x Cotton ratchet covers

Nomex Ear/ neck protector

Care Kit 5-28

Brow pad

Nomex Dutch Ear/neck protector

Washable mesh bag

2x Cotton ratchet covers

Care Kit 5-32

Brow pad

Magma

Washable mesh bag

2x Cotton ratchet covers

Aramid Ear/ neck protector

Care Kit 9C-60

Brow pad

2-layerNomex Dutch Ear/neck protector 4-layer Nomex Dutch Ear/neck protector

Washable mesh bag

2x Cotton ratchet covers

Care Kit 9C-1026

Brow pad

Washable mesh bag

2x Cotton ratchet covers

Care Kit 9C-61

Brow pad

✓ All Bullard helmets can be fully disassembled. This makes cleaning particularly easy.

SAVE UP TO 60% NOW! Order now and save up to 60% compared to individual component purchase

The Bullard team and your distributor are happy to help with any questions!

Highlights from our product range

H Series

Magma

QXT thermal imager

LDX thermal

All current products can be found online at: www.bullard.com

info@bullard.de

www.bullard.com

02642 999980

Bullard Center 2421 Fortune Drive

Americas Operations 1898 Safety Way Cynthiana, KY 41031 • USA 877-BULLARD (285-5273) Tel: +1-859-234-6616 Fax: +1-859-234-8987

Bullard GmbH Dieselstrasse 8a 53424 Remagen • Germany Tel: +49-2642 999980 Fax: +49-2642 9999829

Bullard Asia-Pacific Pte. Ltd. LHK Building 701, Sims Drive, #04-03 Singapore 387383

Lexington, KY 40509 • USA 877-BULLARD (285-5273) Tel: +1-859-234-6616 Fax: +1-859-246-0243

Tel: +65-6745-0556 Fax: +65-6745-5176

Status 3/19