Rothoblaas Catalogue 2019

TECHNICAL ASPECTS

STATIC ADMISSIBLE VALUES

UNCRACKED CONCRETE TENSION

SHEAR

N rec

N rec

V rec [kN] steel 5.8 steel 8.8

[kN]

[kN]

Ø [mm]

h ef,standard [mm]

h ef,max [mm]

Ø [mm]

h ef,standard [mm]

steel 5.8 steel 8.8

steel 5.8 steel 8.8

M8

80 90

160 200 240 320 400 480 540 600

M8

80 90

8,6

13,8 20,2 27,8 34,8 53,3 73,2 89,4

8,6

13,8 21,9 31,9 59,5 93,3

5,1 8,6

8,6

M10 M12 M16 M20 M24 M27 M30

M10 M12 M16 M20 M24 M27 M30

13,8 20,0 34,8 53,3 73,2 89,4

13,8 20,0 37,1 58,1 83,8

13,1 19,4 36,0 56,0 80,6 105,1 128,0

110 128 170 210 240 270

110 128 170 210 240 270

12,0 22,3 34,9 50,3 65,7 80,0

134,3 175,2 213,8

109,5 133,3

106,7

106,7

CRACKED CONCRETE

TENSION

SHEAR

N rec

N rec

V rec [kN] steel 5.8 steel 8.8

[kN]

[kN]

Ø [mm]

h ef,standard [mm]

h ef,max [mm]

Ø [mm]

h ef,standard [mm]

steel 5.8 steel 8.8

steel 5.8 steel 8.8

M12 M16 M20 M24 M27 M30

110 128 170 210 240 270

240 320 400 480 540 600

M12 M16 M20 M24 M27 M30

110 128 170 210 240 270

14,8 19,9 30,5 41,5 53,3 66,7

14,8 19,9 30,5 41,5 53,3 66,7

20,0 37,1 58,1 83,8

31,9 49,8 71,8 94,8

12,0 22,3 34,9 50,3 65,7 80,0

19,4 36,0 56,0 80,6 105,1 128,0

109,5 133,3

120,0 148,1

GENERAL PRINCIPLES:

- Characteristic values according to ETA-17/0347. - Design values can be obtained from characteristic values as follows: R d = R k / γ m . Coefficients γ m are listed in the table and are in accordance with the product certificates. - Admissible values (recommended) are evaluated based on the characteristic values by applying the material safety factors γ m according to ETA and a further partial factor for external actions γ f = 1,4. - For the calculation of anchors with reduced spacing, or too close to the edge, please refer to ETA. Similarly, in case of fastening on concrete- supports with a better-grade, limited thickness or a thick reinforcing layer please see ETA. - For the design of anchors subjected to seismic loading refer to ETA and TR045. - For specifications of the diameters covered by the various certifications (cracked concrete, uncracked concrete, seismic applications), please refer to ETA. (1) For the calculation of anchors in masonry or in case of high bond rods, please refer to ETA document. (2) The table shows the characteristic values NRk and the related partial safety coefficient in accordance with the key failure characteristics. (3) Steel failure mode. (4) Tensile-strength increment factor (excluding steel failure) for both cracked and uncracked concrete.

NOTES:

COMPLEMENTARY PRODUCTS | EPO-FIX PLUS | 213

Made with FlippingBook flipbook maker