Med Sled Instruction Sheets

(Cont.)

STORING THE RACK SYSTEM

Remove rail safety pins and remove all baskets.

1

Remove IV poles (if assembled) and attach to the legs using the grey polymer clips. With 2 people, grasp each end firmly and rotate (flip) entire rack on its back with legs extending into air. The 6 leg locks should slide to the unlock position. If not, slide locking ring to enable legs and feet to fold. Fold legs into under carriage. Make sure legs clear side of rack to completely rest inside rack. NOTE: There is a black plastic retainer clip that should easily catch the leg assembly and “snap” into a hold position. Locate the (2) black slide locks on either side of the rack hinge. Slide the locks to the (unlocked) position. The red-colored (unlocked) label should show fully. After both sets are stored lift one end of rack and fold on top of the other. Make sure the black guides are inside the rack. Fold feet or stabilizer bars down along legs. Fold all 4 feet.

2

3

4

5

6

7

8

Fasten black strap and buckle to ensure rack will not open.

9

Grasp black strap and lift rack into open storage bag. Zip closed and store into basket storage device with 6 baskets.

10

• Trained personnel to assemble and use this product • Never leave patient unattended • Risk of tripping or falling in use of this product • Risk of tipping with use of this product • Do not use on uneven surface • Warning: safety straps produce danger or strangulation PRODUCT WARNINGS

1-866-207-5993 www.medsled.com

©2012 ARC Products, LLC. Med Sled is a registered trademark of ARC Products, LLC. U.S. Patent No. 7810820, U.S. Patent No. 8172238. Evac Basket RackSystem(IS)11.14.12.