KStrong-Tool Attachment D-Ring Lanyard (S)-DL100301

®

LIFESPAN: The estimated product Lifespan depends if the product passes the preuse inspection and periodic inspection by competent person. The following factors can reduce the Lifespan of the product: intense use, contact with chemical substances, especially aggressive environments, extreme temperature exposure, UV exposure, abrasions, cuts, violent impacts, bad use or maintenance. DISCLAIMER: Prior to use the end user must read and understand the manufacturer's instructions supplied with this product at the time of shipment and seek training from their employer's trained personnel on the proper usage of the product. Manufacturer is not liable or responsible for any loss, damage or injury caused or incurred by any person on grounds of improper usage or installation of this product.

TM

TM

TM

TM

VII VIII IX X

III

Elastic Tool Attachment

Serial #: XXXX Batch #: XXXX DOM: MM/YYYY Max. Capacity: 15 lbs. / 6.8 kg Relaxed Tether Length: 11 in / 28 cm Max. Expanded Tether Length: 17 in / 43 cm

I

IV

Model #: DL100101

Compliant with ANSI / ISEA 121-2018 Material: PP, Polyester, Steel.

V

XI

XII

II

VI

TOOL ATTACHMENT

PRODUCT LABELS

Product label has the following information:

Elastic Retrofit Tool Attachment

Webbing Tool Connector

Serial #: XXXX Batch #: XXXX DOM: MM/YYYY Max. Capacity: 5 lbs. / 2.25 kg Relaxed Tether Length: 11 in / 28 cm Max. Expanded Tether Length: 17 in / 43 cm

Serial #: XXXX Batch #:

VII- Serial Number

I-

Product Name Product Category Manufacturer's logo

IX- Date of Manufacture XII - Max. Expanded Tether Length X- Load Capacity of Lanyard VIII- Batch Number XI - Relaxed Tether Length

III- II-

Model #: DL100201

Model #: DL100301

Length: 2.5 in / 6.35 cm XXXX DOM: MM/YYYY Max. Capacity: 3 lbs. / 1.36 kg

VI- Relevant Standards IV- Model Number V-

Material of construction

Compliant with ANSI / ISEA 121-2018 Material: PP, Polyester, Steel.

Compliant with ANSI / ISEA 121-2018 Material: PP, Polyester, Steel.

Tether Cinch Loop

Serial #: XXXX Batch #:

Model #: DL100611

Length: 7.5 in / 19 cm XXXX DOM: MM/YYYY Max. Capacity: 5 lbs. / 2.25 kg

Material: Polyester, Steel.

Compliant with ANSI / ISEA 121-2018

WARNING! Whatever combination you use, make sure that it does not interfere with the safe use of your tool.

EQUIPMENT RECORD

Product Model & type/Identification

Trade Name

Identification number

Tel, fax, email into use

Address

Manufacturer

Date first put into use

Purchase Date

Year of manufacture

Other relevant information (e.g. document number)

PERIODIC EXAMINATION AND REPAIR HISTORY

Date

Name and signature of competent person

Periodic examination next due date

Reason for entry (periodic examination or repair)

Defects noted, repairs carried out and other relevant information

UKS/DL100101/200921-V3

7