KStrong IMPACT Lifeline Series UIM

HORIZONTAL ANCHORAGE LINE SYSTEM

Third Party Installations by uncertified installers is not recommended for these products . In case of third-party installations, KStrong will not be held responsible for any failure of the product in its intended use. Please ensure that the entire system is compatible with the other personal fall protection equipment used, and is in conformance with those recommended for use by KStrong. No change may be done in the life line system without a prior confirmation by KStrong authorized personnel. If the strength of the structure is less than 12kN, (such as Aluminum roofing sheets, concrete, or brick walls), then the Compass software allows the Engineer to Compute an optimum bill of material (BOM), based on the structure's strength. The Engineered lifeline has been designed by trained engineers and installers of KStrong using state-of-the-art Compass software .The lifeline is equipped with advanced shock absorption system which reduces the impact and forces on the receiving structure. The information on structure strength shall be provided by the client. In case the strength of the receiving structure is not known or If in doubt, it is important to get the load calculation done from a competent authority or a certified structural engineer. The Impact Post are suitable for a variety of Roof sheet profiles with a minimum thickness of 0.40mm for steel and 0.70mm for Aluminum . KStrong does not take responsibility for malfunction due to inadequacy in the receiving structure. engineer. You need to ensure that the strength of the receiving structure is greater than the forces generated in the system. If in doubt, please consult your Receiving Structure

IMPACT Fall Arrest System Components

Trapezoidal Roof Profiles

Tensioner

Wire Rope

Carriage Body

Shock Absorber

Extremity Posts

Intermediate Posts

Cable Extremity

Corner Posts

06