KStrong IMPACT Lifeline Series UIM

HORIZONTAL ANCHORAGE LINE SYSTEM

Kliplok Post Assembly

1

2

3

Place cross beam over Kliplock and insert bolt into the beam and Kliplock below

Insert bolt through plain washer, anchor and beam.

and seam clips are secure. tighten bolt to the correct torque setting of Place the steel washer onto the bolt and 17 Nm, making certain the cross beam

4

5

6

Place the washer and nyloc nut onto the bolt. Tighten nut and bolt to the correct torque settings of 17 Nm making certain the cross beam and anchor are secure.

Place the plain washer and nyloc nut onto the bolt. Tighten nut and bolt making certain the extremity base unit lines up with the intended direction of the lifeline system.

The Impact Kliplock post is now ready to be installed on the roof profile as part of the system.

25