KStrong IMPACT Lifeline Series UIM

First page Table of contents Previous page 21 Next page Last page

HORIZONTAL ANCHORAGE LINE SYSTEM

Variable Corner Bend Posts

The Variable Corner bend tube is attached to the intermediate which provides an inclination in lifeline by manually adjusting the angle between 0° to 45° degrees. The Intermediate Variable Corner Bend Post is designed with an inbuilt shock absorption mechanism which activates in the event of a fall and reduces the forces on the user’s body to bearable limits and leaves the roof panel intact to maintain architectural integrity. The Intermediate is designed to create inclination in lifeline by manually adjusting the angle between 0° to 45°.

Minimum allowable radius on intermediate pipe is 188.0mm which will start from minimum distance of 50mm from centre.

AFA935430(CB)

AFA935171(CB)

AFA935171BS(CB)

AFA935185(CB)

TECHNICAL SNAPSHOT

AFA935430(CB)

AFA935171(CB)

AFA935171BS(CB)

AFA935185(CB)

Corner Post

Standing Seam Corner Bend Post

Bend Post Standing Seam Corner

The Corner Piece Is Provided To Install The Anchorage Line On Curved \ Bend Area. Trapezoidal Corner Bend Post 200 mm to 305 mm

Kliplok Corner Bend Post

Design

Seam distance span

320 mm to 650 mm

320 mm to 750 mm

320 mm to 650 mm

The Corner Piece Is Provided To Install The Anchorage Line On Curved \ Bend Area.

Application

6061 T6 Aluminum: Anodized 316 Stainless Steel, Electro Polished 6005 T5 Aluminum, Anodized

6061 T6 Aluminum: Anodized 316 Stainless Steel, Electro Polished 6061 T5 Aluminum, Anodized

316 Stainless Steel ED Coated

Material

Weight

1.79 kgs

2.81 kgs

2.58 kgs

Span Distance Operating Temperature

-40°C to +60°C

5m - 15m

Inspection Frequency

Annual

Annual 15kN

15kN

MBS

EN 795:2012 Type C and TS16415 & AS/NZS 5532:2013

Conforms to

Made with FlippingBook Online newsletter creator