KSTRONG ASIA CATALOGUE

RETRACTABLE FALL ARRESTER BLOCKS

SRL series

Used in Industry

The KStrong Micron has been designed to be used where there is low clearance or lack of overhead structures. The ability to use the Micron for Horizontal and Sharp Edge applications makes it the most versatile lanyard on the Market. It is light weight, stays out of the way and can be easily used as a lanyard replacement. Whether your application requires a single Micron to connect at foot level (Fall Factor 2) or twin leg configurations for an overhead anchor, KStrong Miron reduces the Fall distance as compared to Energy Absorbing Lanyards.

MICRON AFS550002

Swivel Anchorage Eye

Can be used as a Single and Twin Forked Lanyard with SRL Connector

High strength Polymer casing provides maximum durability

AFC609100

Consists of detailed Dos and Don’ts instructions inside the cover

Automatic Quick Fall Arrester to arrest fall to less than 4kN and fall arrest distance to less than 600mm

2m Retractable Webbing provides continuous fall protection without any obstacles- keeps lifeline out of worker’s way, reducing snagging, fragging and trip falls

Has inbuilt Textile Energy Absorber with protective cover on it

Aluminum Swivel Hook

Can also be used when Anchor Point is tha foot level which means Micron complies to Fall factor 2

Benefits of Micron when using at Foot level (Fall Factor 2)

Before Fall

In a Fall Factor 2 condition, the user anchors the lanyard below his foot level. The impact on the user is highest in this situation. Kstrong Micron has been designed to significantly reduce the impact forces applied to user whilst decreasing the risk of serious injuries when used a foot level.

After Fall

Fall Clearance 3.5m

Fall Factor 2

83