KSTRONG ASIA CATALOGUE

rope access and rescue

IRSQ Descender AFX202001

FEATURES

Self Braking System It is equipped with a unique double self braking system which initiates the brake as soon as the handle is released, or clasped too tightly (in panic situations). Polymer Coated Cover Equipped with polymer coated cover to protect the user from the heat generated during descent. Light And Corrosion Resistant Extremely light in weight and highly corrosion resistant. Ideal For Rescue And Descent After properly inserting the rope onto the device, hold the free end of the rope and hold the handle device from other hand. Then start pushing the handle slowly toward the descender’s body which enables the victim to slide downwards at appropriate speed. Also, as the Descender is equipped with a unique braking system which initiates the brake as soon as the handle is released or clasped too tightly (in panic situation), thereby stopping the descent completely.

Descent

Rescue

By user himself

Accompanied Descent

When the user is unconscious

Installation Steps

Put the rope into the Descender To install the rope in the device rope handle of the descender has to be pushed in its extreme open position & pivoting pulley should also be rotated at its extreme open position.

Push the Rope into the Flanges of the Descender Now the rope can be pushed in between both flanges at their lower end that is in between the carabiner and the pivoting pulley. Care to be taken that the load carrying end of the rope is situated by the pulley and the free end of the rope by carabiner.

Now the Descender is ready to use Then twist the ropes around the pulley between the upper end of either flange and thus embrace the pulley with the rope. Be careful that the jamming drive is located between either rope. Eventually move the pivoting pulley back in the device and thus the rope is installed in the descender. If the rope has not been inserted correctly the device will be of no use and will be unable to perform its function.

TECHNICAL SNAPSHOT

Product Code

AFX202001

Material

Aluminium Alloy & Soft thermo plastic handle

Application

Descent on a single rope

12 mm dia Kernmantle Rope as per EN 12841:2006 Type C and 11 mm dia Kernmantle Rope as per EN 341:2011 Type 2 Class A

Works on

Finish

Coloured Anodized

Weight

340.0 gms±10 gms

Maximum rated load

200 kgs

Certified to

EN 341:2011 Type 2 Class A, EN 12841:2006 Type C

*Note: Anodizing Colours may vary

122