Honeywell - Salisbury Electrical Safety Catalog

INSULATING PLASTIC GUARDS/ COVERS

LINE HOSES/ COVERS

ARC FLASH PPE

DIELECTRIC FOOTWEAR

INSULATED JUMPERS

VOLTAGE DETECTORS

INSULATED TOOLS

OUTAGE PROTECTION

SLEEVES

BLANKETS

HISTORY

CONTENT

GROUNDING

SAFETYLINE

HOT STICKS

INSULATORS

GLOVES

FLEXIBLE INSULATED JUMPER CABLES, STICK INSTALLED FLEXIBLE JUMPER CLAMPS & FERRULES FLEXIBLE INSULATED JUMPER CLAMPS

INSULATED JUMPER CLAMP ACCESSORIES STIRRUP CLAMPS Stirrup Clamps are used to convert a hand installed jumper into a stick installed jumper. The stirrup is designed to accept all conventional jumper heads. HOT JUMPER PARKING STAND The Hot Jumper Parking Stand safely holds either glove or stick installed hot bypass jumpers. This insulated tool removes the risk of accidental contact with the uninstalled end of an energized jumper. Installs by hand using rubber insulating gloves or with a standard shotgun stick. The fiberglass jumper hanger bar will accommodate standard size mechanical jumper heads. CONNECTOR LINK The Connector Link connects two insulated jumpers to create a longer jumper length. After the two clamps are connected to the link, the assembly can be wrapped with a small rubber insulating blanket.

15kV

4/0

2/0 1/0

#2

Flexible insulated jumper cables are lightweight and resistant to oil, heat, moisture, ozone and abrasion. The cable is embossed every three feet with the conductor size and kV rating. All jumper cables use fine stranded conductor and a new EPR low temperature unipass orange CV cured jacket. The fine stranded copper conductor is alloy coated and assembled in a unidirectional rope lay for extra flexibility. The conductor has a semiconducting shield surrounding it to relieve voltage stress and improve dielectric strength and service life. STICK INSTALLED FLEXIBLE JUMPERS Stick installed flexible jumpers can be manufactured for hotstick operations using Salisbury heavy-duty eye clamps. Clamps are rated for continuous current and fit all standard shotgun type hotsticks. For ease of application, a Hanger Stud is recommended. Shrouded ferrules are not recommended for use with eye type clamps. Custom built assemblies are available. Contact your local Salisbury representative for more information. Cable meets requirements of ASTM F2321.

2750-ES

25kV

21132RG-ES

1/0

2/0

35kV

4245-ES

196

197

INSULATED JUMPER CLAMP ACCESSORIES

FLEXIBLE INSULATED JUMPER CABLES

Max. Amps Continuous

Weight Ea. lb (kg) 0.3 lb (0.1 kg)

Item # Main Line Range

Description

Weight per 1000 ft lb (kg)

Size & Str. AWG

kV Rating Ø to Ø

Nominal Ø to Grid

Str. Dia. in (mm)

OAL Length in (mm)

Max. Amps Continuous

Item #

2750-ES

—

Connector Link

400 400

21123RG-ES 1033 MCM ASCR to #6 Sol.,

Hot Jumper Stirrup Clamp

3 lb (1.4 kg)

2754-ES 2755-ES 2756-ES 2757-ES 21060-ES 2059-ES 4370-ES

#2-259W 15

10

0.320 in (8.1 mm)

0.75 in (19 mm)

200

440 lb (199 kg)

1.25 in to 0.16 in (32 mm to 4.1mm) 954 MCM ACSR to #6 Sol. 1.14 in to 0.16 in (29 mm to 4.1 mm)

1/0-413W 15 2/0-427W 15 4/0-437W 15 2/0-427W 25 1/0-413W 35 2/0-427W 35

10 10 10 15 20 20

0.403 in (10.2 mm) 0.456 in (11.5 mm)

0.83 in (21 mm) 0.90 in (23 mm)

250 300

600 lb (272 kg) 710 lb (322 kg) 1050 lb (476 kg)

4245-ES

Parking Stand for Hot Jumpers

n/a

3.5 lb (1.6 kg)

0.592 in (15 mm)

1.01 in (25.6 mm) 400

0.456 in (11.5 mm)

1.10 in (28 mm)

300

750 lb (341 kg)

0.403 in (10.2 mm)

1.22 in (31 mm)

250

950 lb (431 kg)

0.48 in (12.1 mm)

1.31 in (33.1 mm) 300

1060 lb (482 kg)