Honeywell - Salisbury Electrical Safety Catalog

INSULATING PLASTIC GUARDS/ COVERS

LINE HOSES/ COVERS

ARC FLASH PPE

DIELECTRIC FOOTWEAR

INSULATED JUMPERS

VOLTAGE DETECTORS

INSULATED TOOLS

OUTAGE PROTECTION

SLEEVES

BLANKETS

HISTORY

CONTENT

GROUNDING

SAFETYLINE

HOT STICKS

INSULATORS

GLOVES

SPECIALTY HOT SWITCH STICKS PIGTAIL STICK

SECTIONALIZER KIT & INSULATING LINK STICKS

1370HR

SECTIONALIZER KIT The Sectionalizer Kit temporarily disconnects and isolates a section of line without interrupting service to the balance of the circuit. The entire operation of installation and removal of the sectionalizers can be performed with live line tools. Particularly useful when circuits are interrupted as a result of conductor, insulation or pole failures. Service can be restored by cutting in sectionalizers to isolate the section of line that is in trouble. Consists of 1.75 in foam-filled fiberglass connected to a manually operated take-up device. The strain of the line is taken by means of the take-up device using the hook (Cat. No. 1370H), which fastens on the end of the socket wrench (Cat. No. 596FG or equal). The conductor is then cut and cleared. INSULATING LINK STICKS The Insulating Link Sticks are designed to isolate rope, hoists, and blocks being used between energized conductors and a pulling device. They also provide dielectric properties if strap hoist becomes contaminated through field use. Cat. Nos. 2512, 2518, and 2524 are made with solid fiberglass. All insulating link sticks are proof tested and marked with WLL prior to shipment. Other lengths and configurations available. All bags hold 3 link sticks. Bags not included.

The Pigtail Stick is designed to lift and guide live lines and maintains clearances while working on poles. The pigtail stick is used to change pin type insulators and ridge pin insulators when the conductor is light enough for one person to lift. Units come standard with 0.875 in (2.2 cm) hook; also available with 1.5 in (3.8 cm) and 2 in (5.1 cm) hooks. Other lengths available. Bag not included. Fiberglass handle diameter: 1.5 in (3.8 cm). STRANDED WIRE HOLDING STICK The Stranded Wire Holding Stick has two 1 in (2.5 cm) diameter fiberglass handles, holds conductors or wires during operations. The 121 Series has 0.75 in (1.9 cm) wide jaws that open to 0.5625 in (1.4 cm), and the 122 Series, has 2 in (5.1 cm) wide jaws that open to 1.5 in (3.8 cm). Other lengths available. Bag not included. CABLE HANDLER The Cable Handler has a 1.25 in (3.2 cm) fiberglass handle. Used to handle, lift, or move energized cables. Other lengths available.

5C4Q-ES

1370H

5C3U-ES

5C2Q-ES

PIGTAIL HEAD ONLY

Handle Length

Weight lb (kg)

Item #

in

cm

Fiberglass used meets the requirements of ASTM F711.

5C2Q-ES 5C3U-ES 5C2U-ES 5C4U-ES 5C3Q-ES 5C4Q-ES

0.875 in

2.2 cm 3.8 cm 2.2 cm 5.1 cm 3.8 cm 5.1 cm

1 lb (0.45 kg) 1 lb (0.45 kg) 1 lb (0.45 kg) 1 lb (0.45 kg) 1 lb (0.45 kg) 1 lb (0.45 kg)

1.5 in

SECTIONALIZER KIT

170

171

0.875 in

Weight lb (kg)

Item #

Description

2 in

1.5 in

1370SL PARTS 1370H 1370HR

Set includes: 3 of 1370A, 1 of 1370H, 1 of 1370FB

100 lb (45.3 kg)

2 in

5012-ES

Hook with 0.5 in drive

1 lb (0.45 kg) 1 lb (0.45 kg) 2 lb (0.91 kg)

Hold down hook with ring

CABLE HANDLER

1370V

Wire holder, 0.5625 in (1.43 cm) max. size wire

Weight lb (kg)

Item #

Handle Length

1370FB

Box w/ inserts 44 in × 12 in × 16 in (112 cm × 31 cm × 41 cm)

60 lb (27.22 kg)

5020HQ-ES

-

-

INSULATING LINK STICKS

Overall Length Length Between Fiberglass

WLL

Weight lb (kg)

Weight lb (kg)

Item #

Cat. No.

Ferrules in (cm)

Diameter in (cm)

lb (kg)

in (cm)

5012-ES 5112-ES

22 in (55.9 cm) 12 in (30.5 cm)

1.25 in (3.2 cm) 1,500 lb (682 kg)

2 lb (0.91 kg)

B522 Bag 1 lb (0.45 kg) B522 Bag 1 lb (0.45 kg)

24 in (61cm)

12 in (30.5 cm)

1.5 in (3.8 cm)

2,500 lb (1,134 kg) 2 lb (0.91 kg)