Honeywell - Salisbury Electrical Safety Catalog

INSULATING PLASTIC GUARDS/ COVERS

LINE HOSES/ COVERS

ARC FLASH PPE

DIELECTRIC FOOTWEAR

INSULATED JUMPERS

VOLTAGE DETECTORS

INSULATED TOOLS

OUTAGE PROTECTION

SLEEVES

BLANKETS

HISTORY

CONTENT

GROUNDING

SAFETYLINE

HOT STICKS

INSULATORS

GLOVES

GROUNDING ACCESSORIES

HYDRAULIC CABLE SPIKE

Pole mounted contact bars are designed to act as a convenient common point for electrical connections and also as a hanger for grounding sets during installation and removal. The Salisbury 2103-ES screw type temporary ground rod is used when an adequate system ground is not available. The design incorporates a copperweld rod with bronze fittings screwed and pinned on both ends. The terminal on the handle is designed to accept cables equipped with a 5/8-11 UNC threaded ferrule. As an alternative, a “C” clamp may also be attached directly to the ground rod shaft.

The hydraulic cable spike is designed to verify that underground cable, up to 1000 MCM, is de-energized before cutting, repairing, splicing or replacing. The cable spike, a solid brass body with a stainless steel piercing tip, is fitted to hydraulic compression tools so that the cable can be accurately spiked from a safe distance. An anodized aluminum insert is included to position the cable precisely. The cable penetrating ground clamp is designed to be used either as a tool for “spiking” jacketed cable or as a part of a grounding assembly used to bond both ends of an opened cable. The 7/8 in long plated steel point is inserted into the eye screw making a low resistant one piece spear. If one point becomes blunted it may be sharpened or replaced with a new spear. Clamps are aluminum body with either smooth or serrated upper jaws. The hard aluminum serrated insert makes optimum contact with the stranded neutral shield.

SCREW GROUND ROD Item #

Weight Ea lb (kg) 8 lb (3.6 kg)

Description

2103-ES

75 in (1.9 m) long

• WARNING ELECTRIC SHOCK HAZARD This tool is not insulated. Use only certified, non-conductive hoses, dielectric fluids , and proper personal protective equipment when using this unit. Failure to do so could result in severe injury or death.

HYDRAULIC CABLE SPIKE Item # Cable Length ft (mm)

POLE MOUNTED CONTACT BARS Item # Description

Description Spiking Tool & Ground Assembly: 2139-ES 4/0 Yellow ground cable (2) 2025-ES 4/0 Unshrouded copper Ferrule Cable spiking tool & insert 4388-ES 1 in (25.4 mm) C-clamp JCM-001-ES Spiking tool 616-ES Canvas bag

Weight Ea lb (kg)

ASTM Grade

Weight Ea. lb (kg)

24320 24321

9.5 lb (4.3 kg)

6 ft (1.8 m)

Contact bar no connection 40 in (1.02 m) chain with adjustable wheel binder

9998-ES

9.1 lb (4.1 kg)

5

8 ft (2.4 m)

11.2 lb (5.1 kg)

21840-ES

2103-ES

SPLICERS Item # Description

24322

10 ft (3 m)

12.9 lb (5.86 kg)

Weight Ea. lb (kg)

RPT1

—

Replacement piercing tip

1 oz (28 kg)

1488-ES

Splicer SLV medium

—

9998-ES

134

135

1489-ES

Splicer SLV large

—

It is critical to protect grounding equipment from moisture, dirt, and other damaging elements with a sturdy storage bag. Salisbury ground storage bag is made from heavy-duty vinyl coated nylon with a resilient covered fiberboard bottom for extra strength. The strong polypropylene handles wrap around the bag to help support the entire contents. Users will be confident that their grounding clamp and jumper assemblies will remain safe and effective.

BAGS Item #

Weight Ea. lb (kg)

Description

Yellow vinyl ground bag 18.5 in × 12 in × 15 in (0.46 m × 0.30 m × 0.38 m)

GRD-BAG-ES

2 lb 2 oz (1.0 kg)

Vinyl coated nylon bag with drawstring 25 in × 28 in (0.63 m × 0.71 m)

2654-ES

—

GRD-BAG-ES