Honeywell - Salisbury Electrical Safety Catalog

INSULATING PLASTIC GUARDS/ COVERS

LINE HOSES/ COVERS

ARC FLASH PPE

DIELECTRIC FOOTWEAR

INSULATED JUMPERS

VOLTAGE DETECTORS

INSULATED TOOLS

OUTAGE PROTECTION

SLEEVES

BLANKETS

HISTORY

CONTENT

GROUNDING

SAFETYLINE

HOT STICKS

INSULATORS

GLOVES

SPECIALTY CLAMPS

HANGER STUD

Cutout clamps are applied with a clampstick into the bottom hinge contact of a cutout. This clamp can be used as part of a ground assembly or by using a contact stud using a standard grounding assembly with “C” clamps from the stud to ground. Lightweight, heavy duty stringing ground installs anywhere along the length of conductor to provide a continuous grounding bond, even if the conductor is slack. Constructed of high-strength aluminum alloy with large diameter sheaves and bronze bushing bearings. Features a side opening for quick, easy installation. Adjustable compression spring assures proper contact for different sizes of conductors and for easy passage of splices. In tests, this clamp withstood a 25 kA, 28 cycle short circuit. The three options for a ground tap connection are: termination for ground cables, contact/hanger stud and connector for ground wire.

Hanger studs are designed to be used with all “C” and duck bill ground clamps. Hanger Studs are used to hold one clamp of a set while the other is being installed on the de-energized line. Hanger studs are not designed or tested to carry current.

1928-ES

HANGER STUDS

Item #

For use with

Material

2427-ES

Aluminum C-clamp 1.25 in / 1.5 in / 2.4 in / 3.5 in (31.75 mm / 38 mm / 61 mm / 89 mm) Aluminum C Clamp 1.25 in / 1.5 in / 2.4 in / 3.5 in (31.75 mm / 38 mm / 61 mm / 89 mm) Bronze Duckbill, 477 Bronze, C-clamp Brass C Clamp - 1 in / 1.25 in / 2.4 in (25.4 mm / 31.75 mm / 61 mm)

1928-ES

Aluminum

4310-ES

4373-ES

2427-ES

Aluminum

2093-ES

Brass

CUTOUT CLAMPS

9983-ES

Brass

Continuous Current (amps) 60 hz

ASTM Grade/ Class

Weight ea. lb (kg)

Thread Type

Eye Screw/ T-Handle

Item #

Description

Material

Tap Size

22742-ES 21204-ES

All Duckbill Clamp All Duckbill Clamp

Aluminum

Brass

2.1 lb (1.1 kg) 3.3 lb (1.5 kg)

Bronze cutout clamp with ferrule connection Bronze cutout clamp with contact stud

4310-ES

Bronze 5

V-thread Eye screw 5/8 - 11 UNC Max. cable size 470 type VI compression ferrules V-thread Eye screw

400 RMS amps, 60 Hz

4373-ES

Bronze 5

BALL & SOCKET SYSTEM

120

121

9983-ES

21190-ES

SOCKET CLAMPS

Continuous Current (amps) 60 hz

ASTM Grade/ Class

Weight ea. lb (kg)

Thread Type

Fits Ball Studs:

Eye Screw/ T-Handle

Strain Relief?

Item #

Description

Material

1.2 lb (0.54 kg) 1.1 lb (0.5 kg)

1 in (25.4 mm) 1 in (25.4 mm)

21190-ES

Eye screw Y

Bronze socket clamp

Bronze 5

V Thread

400 RMS amps, 60 Hz

21277-ES

Eye screw N

Bronze socket clamp

Bronze 5

V Thread