Honeywell - Salisbury Electrical Safety Catalog

INSULATING PLASTIC GUARDS/ COVERS

LINE HOSES/ COVERS

ARC FLASH PPE

DIELECTRIC FOOTWEAR

INSULATED JUMPERS

VOLTAGE DETECTORS

INSULATED TOOLS

OUTAGE PROTECTION

SLEEVES

BLANKETS

HISTORY

CONTENT

GROUNDING

SAFETYLINE

HOT STICKS

INSULATORS

GLOVES

DEEP HEEL OVERSHOES

15 KV OVERBOOTS

The deep heel overshoes provide extra safety when climbing ladders and poles where the deep heel cavity can lock onto the rungs. All are waterproof and made from premium grade, ozone resistant rubber. The construction is hand-layered in full-cut patterns to fit over work boots. The fabric lining makes them easy to get on and off. The overshoes come in 4 styles all with pole-climbing reinforcement patch. Styles come with or without buckles, and with or without a bob sole. The 51508-ES and 51509-ES soles have a durable construction with a non-skid, bar tread outsole. The 51511-ES and 51512-ES have a bob sole with aggressive tread for better traction.

Rated at 15 kV, these 16 inch dielectric overboots were designed with a wider neck opening for easy donning and doffing. This model also contains convenient handles for carrying and pulling the overboot over their daily work boot with ease. Available in size 5-17. Item # 21455WT (size)-ES.

The improved overshoes include a bob sole with aggressive tread for better traction. The deep heel and improved arch are specially designed for climbing ladders comfortably. The wider opening allows for easier on/off.

For sizing of all overshoes and overboots, choose one size up from size of work boot. If work boot has steel toe, choose two sizes up.

21455WT-ES

DIELECTRIC FOOTWEAR SPECIFICATIONS Item # Description 51508 (size)-ES Non-buckle overshoe

DIELECTRIC FOOTWEAR USER INFORMATION INSPECTION

Size

Weight

whole sizes 7-17

3.3 lb 1.5 (kg)

51509 (size)-ES 2 buckle overshoe 4.4 lb (2 kg) 51511 (size)-ES Bob - sole non-buckle overshoe whole and half sizes 7-16 3.3 lb (1.5 kg) 51512 (size)-ES Bob - 2 buckle overshoe whole and half sizes 7-16 4.4 lb (2 kg) Note: When ordering, add size as suffix to item #. Be sure to add a space between the item # and size. Example: 51511 7-ES whole sizes 7-17

CARE AND MAINTENANCE Use household soap or laundry detergent and warm water to clean the footwear, rinse thoroughly and dry. Do not use cleaners that contain petroleum products. If the lining of the footwear is wet, it should be allowed to dry completely before the next use. Below are the recommended storage guidelines: • Store in a cool, dry location. • The location shall be free from chemicals, oils, solvents, heaters, steam pipes and sunlight • Footwear should be stored in the natural shape and not be folded, creased, inside out, or compressed. • Footwear should not be stored when wet or dirty. It is preferable to store footwear inside bags, boxes or containers that are waterproof and puncture resistant, retested at an electrical testing facility.

• CAUTION: Dielectric Footwear should only be used by Qualified Employees: as defined in OSHA 1910.269; trained in and familiar with the safety related work practices, safety procedures and other safety requirements associated with the use of this type of equipment.

In accordance with safe work practices, insulating footwear should be inspected for damage before use each day. Below are examples of what to look for during inspection: • Any holes, tears, punctures, embedded objects or cuts on the footwear. Users should examine the outside, inside and the sole of the footwear. • Any changes in texture, such as inelasticity, swelling, softening or hardening. • If overshoe has buckles and the buckles are broken, the product is considered compromised if the broken buckles are affecting the user from properly wearing the overshoes. Footwear with contaminants should be cleaned before use. If the contaminates cannot be removed, then the footwear shall not be used. If the insulating properties of the footwear are suspected, they shall be removed from service. They shall not be reissued for use until they have been retested at an electrical testing facility.

104

105

51508-ES

51509-ES

51511-ES

51512-ES