Honeywell - Miller Fall Protection Catalogue ASEAN

FALL PROTECTION

ANCHORAGE CONNECTORS & SYSTEM KITS

Miller Grip™ The Miller Grip Anchorage connectors are reusable and can be removed and simply re-installed in a new location. Constructed of stainless steel, aluminum and other non-corrosive materials for a longer service life.

Miller Grip™ Anchorage Connector A safe anchor point is established when the Miller Grip Anchor is inserted into a properly-sized, cured concrete hole. Designed for use in cured concrete with a compression strength of at least 3,000 psi (20.7 MPa) , it can be used for vertical or overhead/ceiling surface applications.

Miller Grip™ Friction Bolt Anchorage Connector A portable/reusable anchorage connector, designed exclusively for use with a friction bolt. A safe anchor point for a single user is established when the Miller Grip Friction Bolt Anchor (SKU 494/) is inserted into a friction bolt with an outside diameter of 1.5 inches (39mm).

494/

PART NO.

HOLE DIAMETER

DESCRIPTION

Miller Grip Anchorage Connector

5,000 lbs. (2,268kg) ultimate strength; for single user connection; 400 lbs. (181kg) maximum capacity 10,000 lbs. (4,536kg) ultimate strength; for single user connection; 400 lbs. (181kg) maximum capacity

496/

3/4-in. (19mm)

497/

1-in. (25mm)

Miller Grip Multi Use Anchorage Connector 499/ 1-in. (25mm) Miller Grip Friction Bolt Anchorage Connector

2,000 lbs. (907kg) safe working load

10,000 lbs. (4,536kg) ultimate strength; for single user 400 lbs. (181kg) maximum capacity

494/

1-1/2-in. (39mm)

Fall Protection Catalogue I sps.honeywell.com I 35