Honeywell Electrical Safety Solutions

The new HHVSB11 Hard Hat Mounted Voltage Detector (HVD) of Honeywell has been designed to keep the user safe from possible electrical hazards. It is an essential safety equipment for all professionals working in and around high voltage equipment and installations. When a person wearing the Honeywell HVD approaches a high-voltage source, the device emits a warning alarm, and its LED light indicators start flashing – alerting the wearer and others around that a high voltage current source is present in the immediate vicinity. THE HONEYWELL HARD HAT MOUNTED VOLTAGE DETECTOR Reliable Shock Protection for Live Fields

Self Testing Voltage Detectors Kits

Product Number

Description

HHVSB11

Honeywell Hard Hat Mounted Voltage Detector

Technical Specifications

• Salisbury’s Self-Testing Voltage Detectors allow testing to be continuous and automatic • An intermittent flash and beep confirms the detector is functioning properly • Self-Testing Voltage Detectors are used to verify live or de-energized conductors • These testers may be used with rubber insulating gloves or hot sticks using the splined universal end fitting • Testers indicate the presence of voltage with an extra bright LED light and a distinctive audible signal • Salisbury voltage detector alarms in the proximity of electric fields so that it is not necessary to make physical contact with the equipment checked.

Detection and alerting of high tension lines (11 KV ) at a distance

Application

Type

Non-Contact

Operating Temperature

0˚C to 55˚C

Detecting Frequency

50Hz / 60Hz

For an 11 KV high tension line with 50 Hertz / 60 Hertz the sensing threshold will be at a distance of 6.5* feet minimum (first buzzer beep). The HVD will only detect AC voltage.

Sensitivity

Detecting Voltage

11 KV

Humidity

20% to 50% relative humidity

Product Dimension

Approx. 50 mm X 90 mm X 60 mm

Product Number

Description

Package Dimension

Approx. 136mm X 94mm X 57mm

1-4544 Tester 240V to 230kV, 1-21517 Case, 1-2500 clampstick adapter 1-4644 Detector 240V to 500kV, 1-21517 Case, 1-2500 clampstick adapter

Weight / Mass

100 gm Approx.

4556

User Interface

Push Button – Power On / Off

4667

Ingress-Protection Rating

IP65 per IEC standard 60529

Alarm: Audible – Buzzer Visual – RED LED Power On Visual – Power on ( Blinking Green LED at a rate of 5 sec )

Voltage Detectors

Audio Visual Indications

Salisbury’s Self-Testing Voltage Detectors allow testing to be continuous and automatic. An intermittent flash and beep confirms the detector is functioning properly.

Buzzer Interface

Yes

Buzzer Sound Level

80 dB \ 10 cm

Battery Voltage in Volts

3 Volts

Product Number

Description

Battery Type

2 X 1.5V AAA

4769 4667

Voltage Detector 240V to 69kV

Typical Warning Distance

Voltage Detector 240V to 500 kV

About 6.5 feet (1.98 Meters) from a 11 KV AC Line

36 | Electrical Safety Solutions