HexArmor Glove Sizing Guide and Glove Care

Chaps Care and Maintenance

HOW-TO: DONNING AND DOFFING HexArmor chaps are designed to be “fast donn” and “fast doff’ products. These easy to follow instructions will help extend the life and ensure maximum protection from your chaps. Chaps can be identified with a “left” or “right” tag on the inside of each leg. Each chap also has a reflective strip on the front of each leg to help identify left and right. If the chaps are put on with the reflective strip on the back of the leg, they are being worn incorrectly and the level of protection may be altered. Attach the holding straps to your belt. There are four different snap settings to adjust length. The chaps should fit loose enough so that there is no binding or pinching when bending or working on your knees.

To remove the chaps, simply un-snap and step out.

CLEANING Option 1: Machine was on regular using warm/cold water. We recommend that you turn the chaps inside out to minimize scratching the tub of the washer.

Machine Wash

Hand Wash

Option 2: Take a five gallon bucket of water and add 2 tablespoons of a mild industrial cleaner (simple green works well) scrub and wash until clean.

Tumble Dry Low

Hang Dry (Indoors)

Tumble dry inside out on medium/cool setting or hang to dry.

Call 1-877-MY ARMOR or visit hexarmor.com