HexArmor Catalogue - Lumber and Pulp & Paper

First page Previous page 7 Next page Last page

Flow-Coating Flow-coating is profoundly different than traditional dip-coating methods used by other safety eyewear brands. Dip-coating applies an identical coating to both sides of the lens and can sacrifice the quality of one protective property over the other. Traditional dip coatings can either be scratch-resistant or anti-fog. The combination of the two compromises the performance of each. Flow-coating technology has allowed HexArmor ® to pioneer four completely new coating combinations in the Americas that include permanent anti-fog on the interior of the lens and either a scratch-resistant hard coat or permanent anti-fog on the exterior of the lens. This specialized dual-coating process is exclusive to HexArmor ® and is a first for the PPE eyewear industry in the Americas. In the Pulp and Paper industry, issues around safety eyewear fogging up becomes more frequent. Machine areas are high in heat and humidity, causing safety glasses to fog up in a matter of seconds. This results in workers having to take their glasses off to see, subjecting them to potential hazards and compliance issues. Having safety eyewear with high-performing anti-fog coatings isn’t just a luxury, it’s a must. While TruShield ® coating will work in most area, HexArmor’s TruShield ® 2F and TruShield ® 2SF are ideal for extreme temperature and humidity changes. These permanent anti-fog coatings on the inside and outside of the lenses offer greater fog protection in more severe conditions. Multipurpose TruShield ™

Clean Environments & Hot-To-Cold Transitions TruShield ™ 2F

Dirt & Tr

TruShield ® 2F Dual-coated lenses are ideal for clean to moderately dirty work environments, where workers transition from cold-to-hot or hot-to-cold. Also provides long-lasting scratch-resistant properties. Permanent Anti-Fog Hard Coat Scratch and Chemical Resistance Fog moisture absorbs into the coating Permanent An i-Fog Permanent Anti-Fog Clean Environments & Hot-To-Cold Transitions TruShi ld ™ 2F

Permanent Anti-Fog w/ Scratch Resistance Dirt & Debris, Severe Fogging TruShield ™ S

Permanent Anti-Fog w/ Scratch Resistance

TruShield ® Multipurpose Coating Multipurpose TruShield ™

A Perma Anti

Fog moisture absorbs into the coating

Fog sprea absor the c

Multipurpose TruShield ™ Hard Coat Scratch and Chemical Resistance

Hard Coat Scratch and Chemical Resistance

Dual- Action Permanent Anti-Fog

Permanent Anti-Fog

w/ Scratch Resistance

Clean Environments & Hot-To-Cold Transitions TruShield ™ 2F

Dirt & Debris, Severe Fogging TruShield ™ S

Contin Tr

Polycarbonate Lens

D Ac

TruShield ® S HexArmor ® TruShield-S dual-coated lenses are ideal for environments where there’s a high degree of dirt or debris, coupled with more severe fogging factors. Permanent Anti-Fog w/ Scratch Resistance Permanent Anti-Fog w/ Scratch Resistance Fog moisture absorbs into the coating Fog moisture absorbs into the coating Fog moisture absorbs into the coating Fog moisture absorbs into the coating Polycarbonate Lens

Hard Coat Scratch and Chemical Resistance

Dual- Action Permanent Anti-Fog Fog moisture spreads then absorbs into the coating

Fog moisture absorbs into the coating

Permanent Anti-Fog

Perma

Anti-

Polycarbonate Lens

Fog moisture absorbs into the coating

Fog moisture spreads then absorbs into the coating

Fog m sprea absor the co

HexArmor ® TruShield ® is a multipurpose dual-coating that’s suitable for most applications and environments. All HexArmor ® coatings have four unique characteristics: • Permanent, never wash off • Hydrophilic properties • Scratch-resistant • Flow coated Permanent Anti-Fog w/ Scratch Resi tance Hard Coat Scratch and Chemical Resistance Fog moisture absorbs into the coating Clean Environments & Hot-To-Cold Transitions TruShield ™ 2F

Multipurpose TruShield ™

Dirt & Debris, Severe Fogging TruShield ™ S

Continuous Fogging TruShield ™ 2SF

Polycarbonate Lens

TruShield ® 2SF HexArmor’s specialized dual-action hydrophilic anti-fog coating is ideal for applications where there is constant fogging. Dual- Action Permanent Anti-Fog Hard Coat Scratch and Chemical Resis ance

Dual- Action Permanent Anti-Fog

Permanent Anti-Fog w/ Scratch Resistance

Permanent Anti-Fog

Fog moisture absorbs into the coating

Fog moisture spreads then absorbs into the coating

Polycarbonate Lens

Call 1.877.MY.ARMOR or visit www.hexarmor.com | 7

Made with FlippingBook HTML5