Firechief Welding Drapes

PRECOATED GLASS FIBRE DRAPE - HEAVY DUTY

MODEL: HS1306-1 HS1306-2 HS1306-3 HS1306-4 HS1306-5

HS1306-25 (ROLL) HS1306-50 (ROLL)

• Protects from molten metal splashes • Ideal for use during cutting and welding operations • Heavy duty, robust material with superior tensile strength • For use in areas where oils, greases, acidic liquids and vapours are present • Withstands penetration by molten metal • Weight 1220g/m 2 • 1.5mm Thickness • Service Temperature Continuous up to 1000 ° C, Short term 1500 °C • EN532:1994 Flammability test (10s flame applied to face of vertical sample) - negative reaction to flame

+44 (0) 330 999 0019

sales@firechiefglobal.com firechiefglobal.com

PRECOATED GLASS FIBRE DRAPE - HEAVY DUTY These heavy duty drapes are made from pre coated glass fibre and are made to protect against molten metal splashes. Their heavy duty design and superior tensile strength make them ideal for use during cutting and welding operations.

MODEL: HS1306-1 HS1306-2 HS1306-3 HS1306-4 HS1306-5

HS1306-25 (ROLL) HS1306-50 (ROLL)

HS1306-1 HS1306-2 HS1306-3 HS1306-4 HS1306-5 HS1306-25 HS1306-50

Model

Product Code Length (m) Width (m) Weight (kg)

104-1003

104-1004

104-1006

104-1007

104-1008

104-1079

104-1080

1 1

1 2

2 2

2 3

3 3

25

50

1

1

1.3

2.5

4.6

6.5

10.2

30.75

61.5

Weight

1230 g/m²

Thickness (@ 100g/cm²)

1.5 mm

Filament diameter

9μ

Burst strength (kg/ cm²) Air permeability @ 10mm W.G. Air permeability @ ½” W.G. Shrinkage @ 500°C Thermal conductivity Resistance to Blowtorch flame @ 1100°C BS476 Pt 8: Stability/ Integrity

>50 kg/cm²

1.6 cc/cm²/sec

3.9 ft³/ft²/mi

0.4%

0.06 W/m/K

>30 minutes

140 minutes

For more information contact: Firechief Global, 3 Lands End Way, Oakham, Rutland, UK, LE15 6RB | Imported into EU by: Sentura Group (Ireland) Ltd, Joyce House, 21-23 Holles Street, Dublin 2, Ireland

+44 (0) 330 999 0019

sales@firechiefglobal.com firechiefglobal.com

Issued: V1_August_21

NEOPRENE COATED WELDING DRAPE - MEDIUM DUTY

MODEL: HSN1-1 HSN1-2 HSN1-3 HSN1-5

• Glass fabric coated on both sides with fully cured Flame Retardant Black Neoprene Rubber with a dusted finish • Water resistant (to 4 bar) • Limited combustability • Resists sparks and light splatter • Good abrasion resistance • Suitable for outdoor exposure (good weather durability) • For use in areas where oils, greases, dilute acidic / alkalis and vapours are present • Complete with brass eyelets to secure in position • Weight of material 850g/m 2 • 0.6mm thickness • Service Temperature -50 / 105°C, Short term 150°C, Long term 95°C • Fire Tested to BS476-7:1987 (as amended) Surface Spread of Flames - Meets Class 1

HSN1-1 104-1028

HSN1-2 104-1029

HSN1-3 104-1032

HSN1-5 104-1034

Model

Product Code Length (m) Width (m) Weight (kg)

1

1.2 1.8 1.8

1.8 1.8 2.8

1.8 2.4 3.7

1.2

1

For more information contact: Firechief Global, 3 Lands End Way, Oakham, Rutland, UK, LE15 6RB | Imported into EU by: Sentura Group (Ireland) Ltd, Joyce House, 21-23 Holles Street, Dublin 2, Ireland

+44 (0) 330 999 0019

sales@firechiefglobal.com firechiefglobal.com

Issued: V1_August21

HIGH PERFORMANCE WELDING DRAPE MEDIUM DUTY

MODEL: HSC1-3 HSC1-4 HSC1-5 HSC1-7 HSC1-9

HSC1-1000 (ROLL) HSC1-1200 (ROLL) HSC1-1800 (ROLL) • High performance continuous filament glass fiber material, coated on both sides with fully cured flame retardant silicone polymer • Flexible and lightweight • Self-extinguishing • Resists sparks and medium metal splatter • Low temperature flexibility • Moderate oil-resistance at high service temperatures • Superior draping characteristics • For use in areas where oils, greases, acidic liquids and vapours are present • Weight of material 270g/m 2 • 0.25mm thickness • Service Temperature - continuous 230 ° C, short term 300 ° C (approx. dependent on environment) • Lower working temp. - Continuous -40 ° C

For more information contact: Firechief Global, 3 Lands End Way, Oakham, Rutland, UK, LE15 6RB | Imported into EU by: Sentura Group (Ireland) Ltd, Joyce House, 21-23 Holles Street, Dublin 2, Ireland

+44 (0) 330 999 0019

sales@firechiefglobal.com firechiefglobal.com

Issued: V1_August_21

HIGH PERFORMANCE WELDING DRAPE MEDIUM DUTY HSC1-3, HSC1-4, HSC1-5, HSC1-7 & HSC1-9 come complete with brass eyelets to secure the drape in position

MODEL: HSC1-3 HSC1-4 HSC1-5 HSC1-7 HSC1-9

See table below for dimensions of individual drapes.

HSC1-1000 (ROLL) HSC1-1200 (ROLL) HSC1-1800 (ROLL)

HSC1-3 HSC1-4 HSC1-5 HSC1-7 HSC1-9 HSC1-1000 HSC1-1200 HSC1-1800

Model

Product Code Length (m) Width (m) Weight (kg)

104-1019

104-1020

104-1021

104-1023

104-1025

104-1074

104-1076

104-1077

1.8 1.8

1.2 2.4

1.8 2.4

1.8 3.6

3.6 3.6

100

100

50 1.8

1

1.2

1.02

0.94

1.35

2.03

4.10

28.5

34.2

25.65

Eyelets

Yes

Yes

Yes

Yes

Yes

No

No

No

For more information contact: Firechief Global, 3 Lands End Way, Oakham, Rutland, UK, LE15 6RB | Imported into EU by: Sentura Group (Ireland) Ltd, Joyce House, 21-23 Holles Street, Dublin 2, Ireland

+44 (0) 330 999 0019

sales@firechiefglobal.com firechiefglobal.com

Issued: V1_August_21

HIGH PERFORMANCE MEDIUM DUTY ROLLED TWILL CLOTH

V1 29 / 0 9 /21 Page 1 of 5

1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING

1.1 Product identifier

Product Name(s): High Performance Medium Duty Rolled Twill Cloth Product Codes: 104-1077 (HSC1-1800) Product Description: Double Faced Silicone rubber coated Glass Fabric

1.2 Relevant identified uses of the substance or mixture and advises against

Identified uses: Industrial uses, Smoke curtains.

1.3 Details of the supplier of the safety data sheet

Address Firechief Global Sentura House, 3 Lands End Way Oakham, Rutland LE15 6RB

Email sales@firechiefglobal.com

1.4 Emergency Telephone Number 0330 999 0019 Office Hours: Monday to Friday | 08:00 - 17:00

2. HAZARDS IDENTIFICATION

2.1 Classification of the substance or the mixture

Classification according to Regulation (EC) No 1272/2008: Not classified.

2.2 Label elements Not applicable.

2.3 Other Hazards

Physical / Chemical Hazards: Not applicable

Health Hazards: May cause mechanical irritation if in contact with eyes, skin, or respiratory system

Environmental Hazards: No significant hazards. Material does not meet the criteria for PBT or vPvB in accordance with REACH Annex III.

HIGH PERFORMANCE MEDIUM DUTY ROLLED TWILL CLOTH

V1 29/09/21 Page 2 of 5

3. COMPOSITION/INFORMATION ON INGREDIENTS

3.1 Substances

Woven Glass Fiber Textile Pigmented Silicone Rubber

3.2 Mixtures

Fabric ~70-90% Oxides of Silicon, Aluminium, Calcium, Boron & Magnesium Fused in an Amorphous Vitreous State Finish ~10-30% Silicone rubber containing pigments Hazardous ingredients

Chemical Name

Amount (wt %)

CAS #

CLP Classification

N/A

4. FIRST AID MEASURES

4.1 Description of first aid measures

Skin:

Contact with hot compound or decomposition products can produce burns. Cool skin rapidly with cold water and wash with soap and water.

Eyes:

Contact with curing fumes, flush eyes with copious amounts of water.

Inhalation:

Inhalation of curing fumes. Remove to fresh air, In case of extreme exposure consult with a doctor.

Other first aid information:

In all cases if irritation persists seek medical attention.

4.2 Most important symptoms and effects, both acute and delayed At processing temperatures, the combined ingredients (elastomer and other processing ingredients) may emit fumes and vapours that may cause irritation to the eyes. Processing operations may create vapours or fumes which may cause respiratory tract irritation. 4.3 Indication of any immediate medical attention and special treatment needed The need to have special means for providing specific and immediate medical treatment available in the workplace is not expected.

5. FIREFIGHTING MEASURES

5.1 Extinguishing media

Suitable extinguishing media: Foam, Carbon Dioxide, Water spray.

5.2 Special hazards arising from the substance or mixture

Fumes of Carbon Dioxide & Carbon Monoxide.

Hazardous combustion products:

5.3 Advice for firefighters

Special fire fighting procedures:

In the event of a fire be aware of noxious fumes. Wear respiratory protection equipment.

HIGH PERFORMANCE MEDIUM DUTY ROLLED TWILL CLOTH

V1 29/09/21 Page 3 of 5

6. ACCIDENTAL RELEASE MEASURES

6.1 Personal precautions, protective equipment and emergency procedures

Not applicable.

6.2 Environmental Precautions

Prevent entry into waterways, sewers, basements or confined areas.

7. HANDLING AND STORAGE

7.1 Precautions for safe handling

Gloves should be worn when handling rubber compounds - Standard Nitrile gloves

7.2 Conditions for safe storage, including any incompatibilities

Store away from heat and ignition sources.

8. EXPOSURE CONTROLS / PERSONAL PROTECTION

8.1 Control parameters

Exposure controls for hazardous components:

Glass Fibre

WEL (Workplace Exposure Limit) 8hr TWA

5.0 mg/m³

Rubber Dust -

WEL (Workplace Exposure Limit) 8hr TWA

6.0 mg/m³

Rubber Fume - WEL (Workplace Exposure Limit) 8hr TWA

0.6 mg/m³ Rubber fume has the potential to produce carcinogenic Nitrosamines and noxious substances

8.2 Exposure controls

Engineering controls

Presence of dust-handling systems is recommended to minimize dust generation and accumulation.

Personal Protection

Personal protective equipment is recommended, in particular if material is hot, to avoid thermal burns and irritation from fumes.

Respiratory: Appropriate respiratory protection if necessary. Hand: Sensitive individuals may need to wear gloves. Eye: Sensitive individuals may need to wear goggles. Skin: Wear long sleeved clothing.

Environmental controls Protect the environment by applying appropriate control measures to prevent or limit emissions.

9. PHYSICAL AND CHEMICAL PROPERTIES

Form: Coated Woven Fabric

Odour: N/A

Colour: Various

Specific gravity: N/A

Melting point/Melting range: 800°C

Flashpoint: N/A

Boiling point/Boiling range: N/A

Auto ignition temp: N/A

HIGH PERFORMANCE MEDIUM DUTY ROLLED TWILL CLOTH

V1 29/09/21 Page 4 of 5

10. STABILITY AND REACTIVITY

10.1 Reactivity There are no known reactivity hazards associated with this product.

10.2 Chemical stability Thermally stable at typical use temperatures.

10.3 Possibility of hazardous reactions Polymerization will not occur.

10.4 Conditions to avoid

Thermal decomposition occurs above 250°C.

10.5 Incompatible materials Strong oxidizers, alkalis and acids.

10.6 Hazardous decomposition products

On decomposition, formation of fumes of Carbon Dioxide & Carbon Monoxide.

11. TOXICOLOGICAL INFORMATION

11.1 Information on toxicological effects

Skin corrosion/irritation Prolonged contact may cause slight skin irritation with local redness.

Serious eye damage/eye irritation Fumes irritant to eyes.

Respiratory sensitisation Fumes irritant to respiratory tract. Pre-existing respiratory and lung diseases may be aggravated.

Aspiration Hazard May be harmful if swallowed and enters airways.

12. ECOLOGICAL INFORMATION

No known harmful effects on the environment. Glass Fabrics are not readily Biodegradable.

13. WASTE DISPOSAL

Dispose as solid waste according to local regulations.

14. TRANSPORT INFORMATION

No special requirements.

15. REGULATORY INFORMATION

No labelling is required for this material by the Chemicals (Hazard Information and Packaging or Supply) Regulations 2002 (CHIP3), in accordance with EC Directives.

HIGH PERFORMANCE MEDIUM DUTY ROLLED TWILL CLOTH

V1 29/09/21 Page 5 of 5

16. OTHER INFORMATION

This product data safety sheet was prepared in compliance with Commission Regulation (EU) 2015/830 of 28 May 2015 of the European Parliament and of the Council on Registration, Evaluation, Authorisation and restriction of Chemicals (REACH) as well as their relevant amendments, on the approximation of laws, regulations and administrative provisions relative to the classification, packaging and labelling of dangerous substances and preparations. This product safety sheet also complies with US OSHA regulations. Whilst proper care has been taken in the preparation of this document, no liability for injury or damage resulting from its use can be accepted. Details given in this document are believed to be correct at the time of going to press. Before using this product in any new process or experiment, a thorough material compatibility and safety study should be carried out.