Fall Arrester AFS510010

Ÿ Ensure that manufacturer’s packing is used during transportation to prevent damage. In case original packing is not available, use polybag which is sealed to prevent moisture. Ÿ It is essential for the safety of the user that if the product is resold outside the original country of destination, the reseller shall provide instruction for use, for maintenance, for periodic examination and for repair in the language of the country in which product is to be used. Ÿ This is advised that annual inspection should be done by a competent person & if any discrepancy is found in product service will be done at authorized service center only. 7. INSTRUCTIONFORMAINTENANCE : Ÿ In case of minor soiling, wipe the equipment with cotton cloth or soft brush. Do not use any abrasive material. For 0 0 intensive cleaning wash in water at a temperature between 25 C to 50 C using a neutral detergent. It should be allowed to dry by itself and be kept away fromopen fire or any other source of heat,Avoid direct sunlight. Ÿ Store in cool dry place, preferably away frommoisture, direct sunlight, extra acidic or basic conditions & sharp edges.

MARKING:

(ii)

Min 12kN EN 795

o 50 C

o 122 F

o -22 F

o -30 C

o 40 max

140kg Max

(viii)

(iii ) (iv )

(i)

(vi)

(vii)

MARKINGEXPLANATION

(iv) Wire Rope Length

(v)

UID for traceability

The Retractable Fall Arrester is marked with:

(i) The CE mark showing that the product meets the (vi) Month/Year of Manufacture requirements of the (vii) Norm&Year (ii) Identification of manufactures (viii) Atex marking (iii) Type or product code PPERegulation (EU) 2016/425

03