DL200311 - Tool Lanyard

Please read and understand the manufacturer's instructions for each component or part of the complete system. Manufacturer's instructions must be followed for proper use, care, and maintenance of this product. These instructions must be retained and be kept available for the worker's reference at all times. Alterations or misuse of this product, or failure to follow instructions, may result in serious injury or death. Note: The user is advised to keep this user instructions document for the life of the product.

2.20 lbs/ 0.99 kg

Very often, the consequences of a falling object are underestimated: Ÿ Dropping a work tool also means the risk of destroying the tool, and the possible damage to property can also have serious consequences in terms of costs, as well as the lost time required by the worker to leave their work station to recover the tool. TM Ÿ The Kaptor range of tool lanyards are the perfect solution for drop prevention of tools while working at height.

19.68 ft.

130.07 lbs. ! / 58 kg

Tool lanyards MUST NEVER be used for Fall Protection of any kind. Extreme caution must always be taken when operating or working near active machinery.

Note: A 2.2 lbs./ 0.99 kg Hammer hurts like it is 130 lbs./ 58 kg After falling from 19.68 ft. Refer to the illustration above.

This manual is as per ANSI/ISEA 121-2018 and must be read and understood in its entirety and used as part of a fall protection training program as required by OSHA or any state regulatory agency. The user must fully understand the proper equipment use and limitations. TM Accordingly, the KStrong Kaptor range range has been developed to hold any type of tool that may accidentally fall and cause damage to property, or serious injuries or even fatalities to workers. In fact, objects dropped by workers are the second largest cause of worker deaths in the workplace.

Ÿ Never use any tool lanyards or its sub component beyond its capacity. WARNINGS Ÿ Tool lanyards or similar products are never to be used as PPE. Ÿ Never tie a knot in the tool lanyards (including its sub systems) Ÿ Never modify or alter the product. Ÿ Be extra careful while using it around the moving machinery.

Ÿ There should always be an appropriate distance in order to avoid a dropped tool hitting other objects during its arrest. Ÿ Always select the tools according to the capacity shown in in the technical specification table. Ÿ The use of these tool lanyards (that are not PPE) does not exempt you from the obligation of wearing PPE, especially a safety helmet.

These are secure anchor points that are used to attach to the objects / tools to prevent their drop while working. ANCHOR ATTACHMENTS BEST SUITED FOR PEOPLE WORKING IN Confined spaces and people working with tools on platforms and scaffoldings.

TECHNICAL SPECIFICATIONS

Category

Product Name

Product Code

Rating

Length

Material

Anchor Attachment Anchor Attachment Anchor Attachment Anchor Attachment Anchor Attachment Anchor Attachment Anchor Attachment Anchor Attachment Anchor Attachment

5 lbs./ 2.2 kg 2 lbs./ 0.90 kg 2 lbs./ 0.90 kg 2 lbs./0.90 kg 35 lbs./ 15.9 kg 80 lbs./ 36 kg 35 lbs./ 15.9 kg 35 lbs./ 15.9 kg 11 lbs./ 4.9 kg

DA300201 DA300301 DA300401 DA300411 DL200101 DL200201 DL200311 DL200301 DA300501

Phone Holder Measuring Tape Holder Wristband Tool Holder Wristband Tool Lanyard V-Ring Anchor Attachment V-Ring Anchor Attachment V-Ring Anchor Attachment V-Ring Anchor Attachment Drill Battery Holder

NA NA NA NA 14" 24" 14" 14" NA

Polyester Polyester, Steel Polyester, Steel Polyester, PP Polyester, Steel Polyester, Steel Polyester, Steel Polyester, Steel Polyester, Steel

1