Bullard NXT Thermal Imager

TRUCK MOUNT CHARGER

Place the imager into the charger with the display up and the bottom facing the charger. The Interface Ring pins align with corresponding holes on the imager. When seated, the release button pops up and locks, and the charger emits a short beep and the

Three status LED's surround the Interface Ring: WHITE Power on BLUE Imager connected AMBER Fault detected

BLUE LED indicates connection between imager and charger.

Wireless charging surface must remain free of debris for good connection with the imager.

When charging, imager power button pulses RED. When fully charged, the button changes to GREEN.

Interface holes on bottom of imager align with pins on charger.

Press release button to remove the imager from the charger.