Bullard NXT Thermal Imager

First page 1 Next page Last page

Authorised Distributer: Northrock Safety Equipment Pte Ltd

Equipped with X Factor technology and the industry’s longest battery run time, the small, lightweight, NFPA 1801 Certified Bullard NXT lets firefighters focus on seeing the most critical details in the heat of the fire when they need it most.

INNOVATIONS for the Fire Service The Bullard NXT is designed not only for long-lasting service on the front line but also low total cost of ownership in the back office. It is purpose-built for today’s fire service including NFPA Certification and the industry’s: • Longest battery run time • Best image quality • Most desired form factor • First wireless charging systems • Most proven durability • Leading imager and battery warranty Outstanding PERFORMANCE The image clarity you have come to expect from the X Factor Family is further refined in the NXT. Equipped with an ultra-high performance LCD display that greatly increases brightness and contrast, the NXT lets firefighters see more clearly in smoke and direct sunlight. Bullard’s NXT can exceed eight hours of continuous run time for the ultimate performance in fire conditions. ADVANCED Features The Bullard NXT is loaded with advanced features, including Super Red Hot colorization, intuitively highlighting high heat scenes in brilliant shades of yellow, orange, and red, and temperature measurement in numeric and relative heat indicator formats. Optional features include Bullard’s exclusive Electronic Thermal Throttle ® , which enables firefighters to optimize scenes with the touch of a button, 2X/4X Digital Zoom that lets firefighters get closer to the action, and Bullard’s SceneCatcher Digital Video Recorder that allows firefighters to capture five hours of video and store hundreds of still images. EASY to Use Like the popular LDX, Bullard’s NXT is distinguishable from other thermal imagers by its uniquely focused compact ergonomics designed specifically for the fire service. The imager’s power button design enables easy powering on and off with a gloved hand. Additionally, multiple colors are available for departmental identification. The wireless charging systems are compact, simple, and allow for easy continuous use. Unmatched DURABILITY The NXT is built Bullard Tough for the way firefighters work. The imager comes standard with a five-year, industry-leading warranty not only on the imager but also on the battery. Electronic Thermal Throttle ®

NFPA 1801 CERTIFIED

MADE IN THE U.S.A.

w w w . b u l l a r d . c o m

Technical Specifications – NFPA 1801 Certification

Standard Features Temperature Measurement Super Red Hot Colorization

Physical Configuration

Numeric and Bar Style

Small HandheldThermal Imager

Engages automatically above 500°F Optional Features and Accessories (if so equipped) ElectronicThermal Throttle

Weight (w/ battery)

2.4 lbs. (1.09 kg)

Dimensions

H 5.4" (137 mm),W 4.6 (117 mm), L 8.2" (208 mm)

Housing Material

Ultem ® Thermoplastic

Blue Hot Spot Colorization (Manually activated)

Upper Housing Colors

Red (standard), Metallic Blue, Blue, Yellow, Lime-Yellow, Orange,White, Black

Digital Zoom SceneCatcher Video Format Video FileType Video Image Size Video RecordTime

2X/4X

Lower Housing Color

Black

Digital Video Recorder (DVR)

Electrical Power Source Battery Capacity Battery Cycles Start-upTime OperatingTime

NTSC

Lithium-ion Rechargeable Battery

AVI

6400 mAh

720 x 480 5.5 hours Micro USB

> 800@70% Capacity

< 4 Seconds

Connection

>6 hours (with or without DVR operating); 7-8 hours in routine conditions

Retract Strap Hard Case Charging Systems Wireless Desktop Charging System (standard) WirelessTruck Mount Charger (optional) Performance 500° F (260º C) Heat Resistance

RechargeTime

5 hours from fully depleted

Infrared Detector DetectorType

Microbolometer Vanadium Oxide

Detector Sensing Material

Detector Resolution Spectral Response

320 x 240

7-14 µ 60 Hz

5 minutes with no damage to electronics 15 minutes of continued operation with no damage

Update Rate

350° F (177 ºC) Heat Resistance

NETD

< 30 mK

-4° F (-20º C) Cold Resistance

Continued operation

Dynamic Range

1100° F 17 μm

Water Resistance Impact Resistance Hazardous Locations

IP67

Pixel Pitch

2 meter drops on concrete with no damage

Video Polarity

White-Hot

Conforms to ISA STD 12.12.01 CLASS I DIV 2, GROUP A, B, C, D, T6 CLASS II DIV 2, GROUP F & G

Lens Material

Germanium 31° V x 40° H

Field of View

ANSI/ISA-12.12.01-2015 CSA-C22.2 No. 60079-0:15 IEC 60079-0:2011, MOD IP6X (ANSI/IEC 60529)

Focus Speed

1 m to ∞

f/1.3

Display Type

Encapsulation

Digital, Liquid Crystal Display (LCD) 3.5" (89 mm) Diagonal TFT Active Matrix

Radiated Emissions

FCC 47 CFR Part 15B EN 55022:2006 IEC 61000-6-1:2005 EN 55024:2010 UN/DOT 38.3 IEC 62133 2nd edition

Size

Electromagnetic Immunity

Pixel Format Brightness Contrast Ratio

RGB

Internal Battery

500 cd/m2 (minimum)

NFPA 1801, Standard onThermal Imagers for the Fire Service Warranty Five (5) years on both thermal imager and battery

350:1 (typical)

Viewing Angle (Typical)

Top = 60°, Bottom= 40°, Left / Right = 60°

Accessories

Wireless Truck Mount Charger

Wireless Desktop Charger (included as standard)

Retract Strap

Americas: Bullard 1898 Safety Way Cynthiana, KY 41031-9303 • USA Toll-free within USA: 877-BULLARD (285-5273)

Europe: Bullard GmbH Lilienthalstrasse 12 53424 Remagen • Germany Tel: +49-2642 999980 Fax: +49-2642 9999829

Asia-Pacific: Bullard Asia Pacific Pte. Ltd. LHK Building 701, Sims Drive, #04-03

Singapore 387383 Tel: +65-6745-0556 Fax: +65-6745-5176

Tel: +1-859-234-6616 Fax: +1-859-234-8987

www.bullard.com

NXT Thermal Imager Bid Specifications

I. Warranty The manufacturer shall make standard a warranty for the thermal imager, all features and accessories installed in the thermal imager to be free of defects in material and workmanship, under normal use and service, for a period of five years. As part of this warranty, the manufacturer must provide free inbound and outbound shipping for transport within the continental United States for all repair service. The manufacturer must provide a warranty which covers all required battery replacements for a period of five years. In addition, the imager’s housing shall carry a limited lifetime warranty. II. Service The manufacturer must be located in the U.S.A. and provide a full-service repair center in the U.S.A. to ensure timely and efficient processing of any service related issues concerning the imager. Warranty repairs must carry a guaranteed 48-hour turnaround (2 full business days from the time of receipt at the service center to the time that the manufacturer ships the imager). Non-warranty repairs must carry a guaranteed 48-hour (2 full business days) turnaround from the time the manufacturer receives purchase order authorization to complete the repairs to the time the manufacturer ships the imager. III. Standards / Quality The manufacturer must ensure quality design and manufacturing methods through third party certification to ISO 9001, or its equivalent. To ensure that the product is of the highest quality, documentation must be presented upon request illustrating a battery of tests that have been conducted to verify water resistance, heat resistance, and shock/ impact resistance. The imager must be compliant to NFPA 1801, Standard on Thermal Imagers for the Fire Service, 2018 Edition at the time of delivery. The imager must be suitable for use in ISA STD 12.12.01 CLASS I DIV 2, GROUP A, B, C, D, T6 CLASS II DIV 2, GROUP F & G hazardous locations. IV. Physical Configuration The imager shall be a hand-held design with a total weight not exceeding 2.4 pounds (1.1 kg) with all standard features installed. The imager’s physical dimensions shall not exceed 5.4 (137 mm) tall, 4.6 (117 mm) wide, and 8.2 (208 mm) long. The imager shall ship in a reusable delivery case. V. Durability The imager shall remain operational after being submerged under 3 feet of water for 30 minutes. The imager shall withstand a 2-meter drop in any orientation and sustain no operational damage. The imager shall be able to withstand an environment temperature of 350º F (177º C) for 15 minutes without operational impact or damage to the unit. The manufacturer must perform these tests in front of designated department representatives at a mutually determined time and location. Failure to perform these tests in front of designated department representatives shall constitute non-compliance with this portion of the specification. VI. Technology The imaging array shall utilize a 320x240 pixel uncooled vanadium oxide (VOx) focal plane array.The Noise Equivalent Temperature Difference (NETD) shall be less than 30 mK. The imager shall exhibit an ability to evade whiteout when pointed directly at flames. The detector shall operate with core temperature ranges of -40°F to 175°F (-40°C to 79°C). The dynamic range of the detector and associated electronics shall be nominally 1100°F (592°C). The detector spectral response shall be 7 to 14 microns. Mid wave or short-wave infrared products that operate below this portion of the infrared spectrum (below 7.5 microns) are not acceptable due to unreliable performance in smoky conditions. The frame rate of the infrared engine shall be no less than 60 Hertz.

VII. Image Colorization In order to provide a greater degree of safety, the imager shall utilize a tri-color automatic

colorization mode. This colorization mode shall utilize a yellow/orange/ red color scheme. The display will show

yellow colorization at temperatures of 500°F (260°C) to 799°F (426°C), orange colorization at temperatures of 800°F (427°C) to 999°F (537°C), and red colorization at temperatures of 1000 °F (538°C) or

hotter. Such colorization shall be graduated in nature so as to be able to discern scene details such as visible thermal flows though the color. The imager shall employ one single colorization scheme of yellow/orange/red which does not vary with ambient thermal energy. Color palettes which colorize objects that are below 500º F are not acceptable. This requirement does not apply to the Manual Colorization Mode (see Switches). VIII. Outer Housing The imager shall be ergonomically designed and the outer shell or housing must be manufactured from heat-resistant Ultem ® thermoplastic. Due to the likelihood of rigorous use, the thermoplastic must be molded with color pigment throughout to mask small surface scratches. Outer shells or housings which are painted or otherwise lacking consistent color through their entire thickness are not acceptable. IX. Colors The imager shall be available in no fewer than eight scratch-resistant colors to allow for color-coding as needed by the department. All lower housings shall be presented in black, with the upper housing to include options for the following colors at minimum: Red (default configuration), Metallic Blue, Yellow, Black, White, Orange, Blue, and Lime Yellow. X. Monitor/Screen The imager shall have a 3.5" (89 mm) diagonal LED backlit Liquid Crystal Display (LCD) screen. The display shall consist of no less than 76,800 pixels for high quality resolution. The screen must be visible in thick smoke to the operator while using it at arms-length. In addition, a clear polycarbonate cover must protect the display screen. This cover must be field-replaceable and watertight. XI. Lens The imager shall possess an f/1.3 lens fabricated of germanium and have no less than a 31° (V) x 40° (H) field of view. The lens shall be protected with a watertight, sealed 2 mm thick germanium cover window. XII. Visual Indicators The imager shall have a battery status indicator on the viewing display to reduce imager size. Battery indicators that are not located on the display, such as separate LED based indicators, are unacceptable as they increase imager size. The imager shall be capable to provide, on the viewing display, surface temperature measurement of objects. The imager must be able to provide simultaneous presentation of bar graph and numeric temperature indicators as well as separate presentation of either indicator. The imager shall provide on-screen indication when manual colorization mode is engaged and when the DVR is recording (if so equipped). XIII. Switches, Features, and Modes of Operation The imager shall use only one switch to activate the unit. The switch shall employ an electronic press-and-hold protection mechanism which prevents accidental shut-off. The imager must employ a secondary switch which enters TI BASIC PLUS mode allowing access to advanced features. During operation, a single press of the main power switch must always return the imager to TI BASIC mode regardless of current operational state or mode. Additionally, the imager must utilize a pair of switches which enable the activation and adjustment of a manual colorization mode, an internally installed Digital Video Recorder (DVR), and/or digital zoom, as applicable to the imager’s installed configuration.

www.bullard.com

Bullard Proprietary and Confidential

XIII. Switches, Features, and Modes of Operation (cont.) As an option or upgrade, the imager must be available with a manual colorization mode which helps the user identify the hottest objects in a scene irrespective of absolute heat levels. This colorization mode must be manually adjustable by the user and colorize the hottest objects in a scene with blue, using gradients of blue so as to discern scene details though the color. Thermal imagers which employ yellow, orange, or red to identify hot objects for a manual colorization mode are not acceptable as they can easily be confused with the automatic colorization modes which typically use such colors to designate fire and high heat conditions. As an option or upgrade, the imager must be available with a digital zoom feature for better view of scene details. The zoom feature should offer 2X and 4X magnification options. As an option or upgrade, the imager must be available with an internally housed Digital Video Recorder (DVR) which enables the recording of thermal imaging video to the internal memory of the thermal imager. The DVR must be manually operable by the user enabling activation and deactivation with a button press. The DVR must be capable of recording 5.5 hours of video in 720 x 480 resolution. Stored digital video shall download to the user’s computer via USB connection. A time and date stamp shall be displayed at the beginning of recorded video for documentation purposes. Attachable DVRs are not acceptable as they increase total size and weight.

XIV. Strap Systems To reduce bulk, the imager must not have an integral strap system; however, the imager shall accommodate an available self-retracting strap. This retractable strap shall be attachable to a D-ring at the base of the thermal imager, under the display, and must be capable of holding the unit to the firefighter’s body with the full weight of the imager, with battery, hanging unsupported from the strap. All straps must be field replaceable. XV. Power Supply When fully charged, the imager shall provide a minimum of 6 hours of continuous use with the DVR recording. XVI. Operation The imager must be fully operational no more than four seconds after activating the power switch. The imager must not have a standby switch or mode. XVII. Truck Mount The manufacturer must offer a truck mounted charging system to mount the imager and internal charging system in a vehicle or fire apparatus or on the wall of a fire station. The system must be compliant to NFPA 1901 when properly mounted in a vehicle or fire apparatus. The truck mount must carry a one-year warranty.

Americas: Bullard 1898 Safety Way Cynthiana, KY 41031-9303 • U.S.A. Toll-free within U.S.A.: 877-BULLARD (285 5273)

Europe: Bullard GmbH Lilienthalstrasse 12 53424 Remagen • Germany Tel: +49-2642 999980 Fax: +49-2642 9999829

Asia-Pacific: Bullard Asia Pacific Pte. Ltd. LHK Building 701, Sims Drive, #04-03

ISO 9001 certified

Singapore 387383 Tel: +65-6745-0556 Fax: +65-6745-5176

Tel: +1-859-234-6616 Fax: +1-859-234-8987

www.bullard.com

8591 AM EN (0618)

Bullard Proprietary and Confidential

May 25, 2018

Keith Kegley Bullard 1898 Safety Way Cynthiana, KY 41031-9303

Certification Letter

Dear Mr. Kegley: We are pleased to confirm that the Thermal Imaging Camera models below are certified by the Safety Equipment Institute, effective May 25, 2018. The initial certification testing and evaluation was successfully completed on March 29, 2018 in accordance with the requirements of NFPA 1801-2018, Standard on Thermal Imagers for the Fire Service: SEI Ref. No. Brand Model No. TIC BUL 02 Bullard NXT Series Bullard Thermal Imaging Camera Series with no optional camera mounted accessories. Offered in various color combinations including Black Lower Enclosure and user selected Upper Enclosure Color (options include Black, Blue, Metallic Blue, Red, Orange, White, Green, Gray, Yellow and Lime Yellow) The SEI Certification Mark may be used in the marketing, packaging and promotion of the model detailed above, in accordance with the provisions of the SEI Certification Program Manual . Per the SEI Certification Program Manual, SEI shall certify the manufacturer's product model(s) and grant the right to use the SEI certification mark when 1) the Testing Laboratory has determined that the product model submitted and tested successfully meets the appropriate product standard, 2) the Quality Assurance Auditor has determined that the manufacturer complies with SEI quality assurance requirements through an on-site audit, including a review of the quality manual and procedures, 3) the manufacturer has paid all fees, and 4) product liability insurance requirements are met. Following initial certification, all product models are tested, at least, annually and are selected by the SEI auditor during the annual quality assurance audit. SEI’s certification program is accredited as a System Type 5 per ISO/IEC 17067:2013(E). Thank you for your participation in the SEI Certification Program. Please feel free to call me if you have any questions or would like other assistance. Sincerely, James A Rose James A. Rose Stephen R. Sanders Technical Consultant Technical Director

cc:

Bonnie Kelley, Bullard Paul Clarke, SEI Auditor

Safety Equipment Institute 1307 Dolley Madison Blvd. Suite 3A McLean, Virginia 22101 Tel: 703/442-5732 FAX: 703/442-5756 www.SEInet.org

BULLARD NXT USER TRAINING

OVERVIEW OF OPERATIONS

IMAGER CONTROLS

POWER Button (Single press exits TI BASIC PLUS mode)

IMAGER CONTROLS

Imager Status Indicator SOLID WHITE

Imager powered ON Imager fully charged

POWER Button (Single press exits TI BASIC PLUS mode)

SOLID GREEN PULSING GREEN PULSING RED FLASHING AMBER

Charge system processing

Imager charging

Error (May flash in extreme high/low temps)

IMAGER CONTROLS

Imager Status Indicator SOLID WHITE

Imager powered ON Imager fully charged

POWER Button (Single press exits TI BASIC PLUS mode)

SOLID GREEN PULSING GREEN PULSING RED FLASHING AMBER

Charge system processing

Imager charging

Error (May flash in extreme high/low temps)

LEFT and RIGHT Buttons (Engages Digital Zoom) (Long press) (Zoom only in TI BASIC PLUS Mode)

IMAGER CONTROLS

Imager Status Indicator SOLID WHITE

Imager powered ON Imager fully charged

POWER Button (Single press exits TI BASIC PLUS mode)

SOLID GREEN PULSING GREEN PULSING RED FLASHING AMBER

Charge system processing

Imager charging

Error (May flash in extreme high/low temps)

LEFT and RIGHT Buttons (Engages Digital Zoom) (Long press) (Zoom only in TI BASIC PLUS Mode)

RIGHT Button (Controls DVR and ETT) (ETT only in TI BASIC PLUS Mode) (DVR available in all modes)

IMAGER CONTROLS

Imager Status Indicator SOLID WHITE

Imager powered ON Imager fully charged

POWER Button (Single press exits TI BASIC PLUS mode)

SOLID GREEN PULSING GREEN PULSING RED FLASHING AMBER

Charge system processing

Imager charging

Error (May flash in extreme high/low temps)

LEFT and RIGHT Buttons (Engages Digital Zoom) (Long press) (Zoom only in TI BASIC PLUS Mode)

LEFT Button (Engages TI BASIC PLUS Mode) (Long press) (Engages and controls ETT) (ETT only in TI BASIC PLUS Mode)

RIGHT Button (Controls DVR and ETT) (ETT only in TI BASIC PLUS Mode) (DVR available in all modes)

IMAGER CONTROLS

Imager Status Indicator SOLID WHITE

Imager powered ON Imager fully charged

POWER Button (Single press exits TI BASIC PLUS mode)

SOLID GREEN PULSING GREEN PULSING RED FLASHING AMBER

Charge system processing

Imager charging

Error (May flash in extreme high/low temps)

LEFT and RIGHT Buttons (Engages Digital Zoom) (Long press) (Zoom only in TI BASIC PLUS Mode)

LEFT Button (Engages TI BASIC PLUS Mode) (Long press) (Engages and controls ETT) (ETT only in TI BASIC PLUS Mode)

RIGHT Button (Controls DVR and ETT) (ETT only in TI BASIC PLUS Mode) (DVR available in all modes)

NOTE: NFPA 1801-2013 requires that "extended" features be segregated to TI BASIC PLUS mode. This mode is entered with a long-press of the LEFT button. When in this mode, Electronic Thermal Throttle (ETT), and Digital Zoom (if so equipped) are available. A single click of the GREEN Power button exits this mode.

ON-SCREEN DISPLAYS

Alarm and operational indicators

Temperature sensing indicators

Additional information area

Low sensitivity mode indicator

Change in color reference indicator

DVR indicator

ETT indicator (TI BASIC PLUS only) Zoom indicator (TI BASIC PLUS only) USB indicator

Heat color reference bar

Numeric temperature indicator

TI BASIC PLUS mode indicator

ON-SCREEN DISPLAYS

Alarm and operational indicators

Temperature sensing indicators

Additional information area

Low sensitivity mode indicator

Change in color reference indicator

DVR indicator

ETT indicator (TI BASIC PLUS only) Zoom indicator (TI BASIC PLUS only) USB indicator

Heat color reference bar

Numeric temperature indicator

TI BASIC PLUS mode indicator

POWER INDICATIONS

ON-SCREEN DISPLAYS

Alarm and operational indicators

Temperature sensing indicators

Additional information area

Low sensitivity mode indicator

Change in color reference indicator

DVR indicator

ETT indicator (TI BASIC PLUS only) Zoom indicator (TI BASIC PLUS only) USB indicator

Heat color reference bar

Numeric temperature indicator

TI BASIC PLUS mode indicator

POWER INDICATIONS

NOTE: At extremely low battery levels (flashing red) interference in the display may be observed prior to full shutdown. This is normal as the imager manages remaining energy for proper shutdown.

ON-SCREEN DISPLAYS

Alarm and operational indicators

Temperature sensing indicators

Additional information area

Low sensitivity mode indicator

Change in color reference indicator

DVR indicator

ETT indicator (TI BASIC PLUS only) Zoom indicator (TI BASIC PLUS only) USB indicator

Heat color reference bar

Numeric temperature indicator

TI BASIC PLUS mode indicator

POWER INDICATIONS

NOTE: At extremely low battery levels (flashing red) interference in the display may be observed prior to full shutdown. This is normal as the imager manages remaining energy for proper shutdown.

NFPA 1801-2013 mandates location and appearance of on screen symbology for display uniformity across different types of thermal imagers.

BASIC USAGE

Super Red Hot (SRH) high-heat colorization automatically overlays color onto the thermal image in high-heat situations: YELLOW 500º F ORANGE 800º F RED 1000º F Note that colors are

semi-transparent, enabling "seeing through" the fire.

BASIC USAGE

Super Red Hot (SRH) high-heat colorization automatically overlays color onto the thermal image in high-heat situations: YELLOW 500º F ORANGE 800º F RED 1000º F Note that colors are

Colors applied to the image correspond to the Color Reference Bar, adjacent to the Relative Heat Indicator on the far right of the display.

semi-transparent, enabling "seeing through" the fire.

BASIC USAGE

Super Red Hot (SRH) high-heat colorization automatically overlays color onto the thermal image in high-heat situations: YELLOW 500º F ORANGE 800º F RED 1000º F Note that colors are

Colors applied to the image correspond to the Color Reference Bar, adjacent to the Relative Heat Indicator on the far right of the display.

semi-transparent, enabling "seeing through" the fire.

The displayed thermal image consists of black, white, and grey elements which indicate heat signatures of objects and scene dynamics. Warmer elements appear as lighter shades, while cooler elements appear as darker shades. This type of display is commonly referred to as "white-hot".

OPTIONAL ETT

The number (0-99) is a reference point indicating the relative level of ETT engagement; by itself it has no specific meaning. When engaged, the LEFT and RIGHT buttons adjust ETT.

OPTIONAL ETT

The number (0-99) is a reference point indicating the relative level of ETT engagement; by itself it has no specific meaning. When engaged, the LEFT and RIGHT buttons adjust ETT.

Electronic Thermal Throttle (ETT) is a hot spot indicator for locating heat sources in overhaul and size up, electrical troubleshooting etc. When engaged, ETT senses the hottest area in the scene and colors it blue.

OPTIONAL ETT

The number (0-99) is a reference point indicating the relative level of ETT engagement; by itself it has no specific meaning. When engaged, the LEFT and RIGHT buttons adjust ETT. There are three ways to disengage ETT: (1) depress both LEFT and RIGHT buttons (2) exit TI BASIC PLUS mode by pressing the POWER button (3) cycle the ETT engagement reading past 99

OPTIONAL ETT

ETT is only available in TI BASIC PLUS mode. To engage ETT, enter TI BASIC PLUS mode by holding the LEFT button for approximately three seconds. After the PLUS mode indicator is illuminated, then press the LEFT button again to engage ETT. “TT**” will appear on the screen.

OPTIONAL DVR

To record video using the DVR, press and hold the RIGHT button for approximately (3) seconds. A red dot indicates recording. To stop recording, press and hold the RIGHT button again.

OPTIONAL DVR

To record video using the DVR, press and hold the RIGHT button for approximately (3) seconds. A red dot indicates recording. To stop recording, press and hold the RIGHT button again.

When the battery is below 25% of charge, the imager disables the DVR to save energy and extend operating time. This is indicated by a black "X" being drawn over the red dot. This indication will also be seen for 8 seconds upon startup while the DVR initializes.

OPTIONAL DVR

To record video using the DVR, press and hold the RIGHT button for approximately (3) seconds. A red dot indicates recording. To stop recording, press and hold the RIGHT button again.

The DVR has 8 GB of memory, which stores about 5.5 hours of video. When full, the DVR overwrites the oldest file available. Videos are recorded in 3 minute segment files. Videos can be retrieved by connecting the imager to a computer via USB. The DVR operates like any external flash or hard drive. When USB is connected an icon will appear on the screen.

OPTIONAL DIGITAL ZOOM

The digital zoom function is only

available in TI BASIC PLUS mode. To enable TI BASIC PLUS, press and hold the LEFT button until the PLUS icon appears.

OPTIONAL DIGITAL ZOOM

The digital zoom function is only

available in TI BASIC PLUS mode. To enable TI BASIC PLUS, press and hold the LEFT button until the PLUS icon appears.

To enable digital zoom, when in TI BASIC PLUS MODE, press and hold both the LEFT and RIGHT buttons for approximately 3 seconds. The zoom will engage at 2X and an indicator will appear. Subsequent press-hold of both buttons will cycle between 2X > 4X > 0X.

TRUCK MOUNT CHARGER

The charger mounts on its long side using (4) provided 5/16" self-tapping hex screws.

Vertical and horizontal mounting are suitable.

TRUCK MOUNT CHARGER

The charger mounts on its long side using (4) provided 5/16" self-tapping hex screws.

Two wires on the back of the charger apply power from the vehicle, color-coded red positive (+) and black negative (-). Apply power from a 12-24 VDC 5-Amp fused power source (user supplied and installed.) Connect to an unswitched circuit which provides power at all times.

Vertical and horizontal mounting are suitable.

TRUCK MOUNT CHARGER

The charger mounts on its long side using (4) provided 5/16" self-tapping hex screws.

Vertical and horizontal mounting are suitable.

The four pins of the Interface Ring align with corresponding holes on the bottom of the imager. The Interface Ring is field-replaceable if worn.

TRUCK MOUNT CHARGER

The charger mounts on its long side using (4) provided 5/16" self-tapping hex screws.

Vertical and horizontal mounting are suitable.

The four pins of the Interface Ring align with corresponding holes on the bottom of the imager. The Interface Ring is field-replaceable if worn.

Off-vehicle usage is supported through an optional 12 VDC power supply.

TRUCK MOUNT CHARGER

The charger mounts on its long side using (4) provided 5/16" self-tapping hex screws.

Vertical and horizontal mounting are suitable.

The four pins of the Interface Ring align with corresponding holes on the bottom of the imager. The Interface Ring is field-replaceable if worn.

Wireless charging surface must remain free of debris for good connection with the imager.

Off-vehicle usage is supported through an optional 12 VDC power supply.

TRUCK MOUNT CHARGER

Place the imager into the charger with the display up and the bottom facing the charger. The Interface Ring pins align with corresponding holes on the imager. When seated, the release button pops up and locks, and the charger emits a short beep and the

BLUE LED indicates connection between imager and charger.

TRUCK MOUNT CHARGER

Three status LED's surround the Interface Ring: WHITE Power on BLUE Imager connected AMBER Fault detected

BLUE LED indicates connection between imager and charger.

TRUCK MOUNT CHARGER

Three status LED's surround the Interface Ring: WHITE Power on BLUE Imager connected AMBER Fault detected

BLUE LED indicates connection between imager and charger.