AFX203058 Rigging Plate 8-holes

Ÿ Remove all dirt, corrosives, and contaminants from Rigging Plate Anchor before and after each use. Ÿ If Rigging Plate Anchor cannot be cleaned with plain water, use mild soap and water, then rinse and wipe dry. NEVER clean Rigging Rope Anchor with corrosive substances. Ÿ When not in use, store equipment where it will not be affected by heat, light, excessive moisture, chemicals, or other degrading elements. 15. WARNING : Ÿ The equipment should only be used by a competent person or a person who has been trained in its use. Ÿ It is prohibited to make any alterations or additions to the equipment without the manufacturer prior written consent, and any repair shall only be carried out in accordance with manufacturers procedures. Ÿ It is essential for safety that equipment is withdrawn from use immediately should It has been used to arrest a fall and not used again until confirmed in writing by a competent person that it is acceptable to do so. Ÿ Use of equipment in unintended applications may result in serious injury or death. Maximum 1 attachment per connection point

04