AFX203058 Rigging Plate 8-holes

INTRODUCTION: Ÿ This manual must be read and understood in its entirety, and used as part of an employee training program as required by OSHA or any applicable state agency. Ÿ This and any other included instructions must be made available to the user of the equipment. The user must understand how to safely and effectively use the Rigging Plate, and all fall safety equipment used in combination with the Rigging Plate. APPLICABLE SAFETY STANDARDS: When used according to instruction specifications, this product conforms to CE 0598 89/686/EEC, ANSI.1-2007 & CNB/P/11.114 and meets or exceeds all applicable OSHA 1926 Subpart M, OSHA 1910, ANSI Z359.1-2007, and ANSI A10.32-2012 standards for fall protection. Applicable standards and regulations depend on the type of work being done, and also might include state-specific regulations. Consult regulatory agencies for more information on personal fall arrest systems and associated components. APPLCATION : Ÿ IRSQ Rigging Plate is designed to organize and provide multiple anchor points in multiple directions for superior versatility. Note: Eye of the plate is capable to connect the karabiners having dia of 19mm. Ÿ Rigging Plate Rope Anchors may be used in Restraint applications. Restraint systems prevent workers from reaching the leading edge of a fall hazard. Always account for fully deployed length of lanyard/SRL. Structure must withstand loads applied in the directions permitted by the system of at least 1000 lbs (4.5 kN) No free fall is permitted. Restraint systems may only be used on surfaces with 0 0 slopes up to up to 4 / 12 (vertical/ horizontal) . Applicable D-rings: Dorsal, Chest, Side, Shoulder. Ÿ NEVER for simultaneous use in Fall Arrest and Restraint. WORKER CLASSIFICATIONS: Ÿ Qualified Person: A person with an accredited degree or certification, and with extensive experience or sufficient professional standing, who is considered proficient in planning and reviewing the conformity of fall protection and rescue systems. Ÿ Competent Person: A highly trained and experienced person who is ASSIGNED BY THE EMPLOYER to be responsible for all elements of a fall safety program, including, but not limited to, its regulation, management, and application. A person who is proficient in identifying existing and predictable fall hazards, and who has the authority to stop work in order to eliminate hazards. Ÿ Authorized Person: A person who is assigned by their employer to work around or be subject to potential or existing fall hazards. It is the responsibility of a Qualified or Competent person to supervise the job site and ensure all applicable safety regulations are complied with. Please read and understand the manufacturer's instructions for each component or part of the complete system. Manufacturer's instructions must be followed for proper use, care, and maintenance of this product. These instructions must be retained and be kept available for the user's reference at all times. Alterations or misuse of this product, or failure to follow instructions, may result in serious injury or death. Note: The user is advised to keep this user instructions document for the life of the product.

1.

2.

3.

4.

5.

COMPONENTS AND SPECIFICATIONS : Ÿ

Material: High Strength Aluminium Alloy

01