AFT710007-Tripod (7ft)

11. LIMITATIONS :

Ÿ Tripod should be a personal property of its user. Ÿ It should not be used in highly acidic or basic environments. 12. ADVICE& INFORMATION: Ÿ Anchor device is appropriate only for single person use. Ÿ When Anchor device is used as part of a fall arrest system, the user shall be equipped with a means of limiting the maximum dynamic forces exerted on the user during the arrest of a fall to amaximumof 6 kN. Ÿ There is no deflection on the anchor device & there is no displacement of theAnchor point during the services. Ÿ Webbing used in Tripod legs aremade up of Nylonmaterial. Ÿ Anchor device should only be used for personal fall protection equipment and not for lifting equipments. Ÿ It is advisable to use the dorsal attachment D-Ring of the harness for connection. Ÿ Afull body harness (Confirming standard EN 361) is the only acceptable body holding device that can be used in fall arrest system. Ÿ It is essential for the safety of user that if the product is resold outside the original country of destination, the reseller shall provide instruction for use, for maintenance, for periodic examination and for repair in the language of country in which product is to be used. Ÿ When the equipment become wet, either from being in use or when due to cleaning. It should be allowed to dry by itself and be kept away fromopen fire or any other source of heat. Ÿ No lubrication to be used on device. 13. COMPATIBILITY : To optimize protection, in some instances it may be necessary to use the tripod with suitable PPE such as: boots/gloves/helmet and ear protection. In this case, before carrying out the risk-related activity, consult your supplier to ensure that all your protective products are compatible and suitable for your application. 14. REPAIR: If the product becomes damaged, it will NOT provide the optimum level of protection, and therefore should be immediately removed from service. It needs to be inspected to see if it is replaced or repaired. Never use the damaged product. Repair is only permitted by the manufacturer or a nominated repair centre or individual approved by themanufacturer. 15. CLEANING &MAINTENANCE: In case of minor soiling, wipe the tripod with cotton cloth or a soft brush. Do not use any abrasive material. For 0 0 intensive cleaning wash the tripod in water at a temperature between 30 C to 60 C by using a neutral detergent (pH 7). The washing 0 temperature should not exceed 60 C. Do not use acidic or basic detergents. 16. STORAGE AND TRANSPORT: When not in use, store the tripod in a well-ventilated area away from heavily acidic or basic environment. Never place heavy items on top of it. Also ensure that the tripod is stored away from chemically hazardous environment. Preferably storage should be in a dry environment.Always usemanufacturer's standard packaging during transportation to protect it fromdamage or moisture. 17. WITHDRAWAL FROMUSE: If the system has been used to arrest a fall, it should be removed from service and returned to the manufacturer or a competent repair centre for servicing and re testing. 18. WARNING: Ÿ Do not make any alteration or additions to the equipment without the manufacturer's prior written consent and repair shall only be carried out by personnel trained by themanufacture & duly authorized by him. Ÿ The equipment shall not be used outside its limitation, or for any purpose other than that for which it is intended.

05