AFA920515 Anchor Strap

9. COMPATIBILITY: Ÿ To optimise protection, in some instance it may be necessary to use the anchorage sling with suitable ppe such as boots/ gloves/ helmet/ ear defenders. Ÿ In this case, before carrying out the risk-related activity, consult your supplier to ensure that all your protective products are compatible and suitable for your application. 10. MATERIAL USED: Non-metallic part of the sling i.e. webbing is made up of Polyester & Aramid is used to make the Hotworx Welders Cross Arm Strap. 11. STORAGE AND TRANSPORTATION: Follow the storage and transportation instructions procedure laid below strictly. Storage: Ÿ Store in cool dry place, preferably away from moisture, direct sunlight, extra acidic or basic conditions, sharp edges. Ÿ When not in use, store the anchorage slings in a well-ventilated area away from heavily acidic or basic environment. Ÿ Never place heavy items on top of it. Ÿ Also ensure that it is stored away from chemically hazardous environment preferably storage should be in dry environment. Transportation: Ÿ Ensure that manufacturer’s packing is used during transportation to prevent damage. In case original packing in not available, use polybag which is sealed to prevent moisture. 12. REPAIR: Ÿ If the product becomes damaged, it will NOT provide the optimum level of protection, and therefore should be immediately removed from service. Ÿ Never use the damaged product. Ÿ Repair is permitted, provided that it is either done by the manufacturer or a competent repair centre or individual approved by the manufacturer. 13. CLEANING: Ÿ In case of minor soiling, wipe the anchorage sling with cotton cloth or a soft brush. Ÿ Do not use any abrasive material. Ÿ For intensive cleaning wash the anchorage sling in water at a temperature not more than 40ºC by using a neutral detergent (pH7). Ÿ The washing temperature should not exceed 40ºC. Ÿ Do not use acidic or basic detergents. Ÿ When the equipment becomes wet, either from being in use or when due to cleaning, it shall be allowed to dry naturally, and shall be kept away from direct heat. 14. WITHDRAWAL FROM USE: If the system has been used to arrest a fall, it should be removed from service and returned to the manufacturer or a competent repair centre for servicing and retest. 16. HOW TO DISPOSE AN ANCHORAGE SLING: When the anchorage sling becomes unfit or in case of any wear and tear, dispose the anchorage sling immediately. Follow the steps for Disposal: Ÿ Make the three plastic crates namely- Textile, Metal & Plastic for placing the respective components of the anchorage sling. Ÿ Spread the anchorage sling on a table / flat surface. Ÿ Inspect the wear & tear present on the anchorage sling. Ÿ If any wear and tear is observed, dispose the anchorage sling using a sharp pair of scissor; first cut the Textile and dismantle the anchorage sling. Ÿ Put the Textile, Plastic & Metal components in their respective plastic crates.

04